We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight black DDR2 FBDIMM sticks in a row

DELL

DELL 32GB (8×4GB) DDR2 667MHz FBDIMM 240-Pin PC2-5300 PowerEdge 1950 III

SKU CH-0RS6-HRPJW

32GB DDR2 FBDIMM kit with eight 4GB modules at 667MHz for Dell PowerEdge 1950 III servers

  • Capacity32GB (8 x 4GB)
  • Type240-Pin DDR2 SDRAM
  • 32 GB capacity powers Dell PowerEdge 1950 III servers
  • 8 x 4 GB modules fill every slot for full density
  • DDR2 667 MHz speed matches PC2-5300 spec
  • Fully buffered FBDIMM design ensures signal integrity
  • 240-pin form factor fits factory memory sockets

32 GB DDR2 kit for PowerEdge 1950 III

This 32 GB kit contains eight 4 GB modules built as 240-pin DDR2 SDRAM. It is intended for administrators who need to populate every slot in a Dell PowerEdge 1950 III server.

Fully buffered 240-pin FBDIMM form factor

Each module uses the fully buffered FBDIMM design that the 1950 III memory controller requires. The 240-pin edge connector fits only the server’s registered DIMM sockets and cannot be used in standard desktop boards.

PC2-5300 667 MHz speed rating

The memory operates at the PC2-5300 667 MHz specification that the platform expects. Systems needing a different DDR generation or a higher data rate will not accept these modules.

Highlights

  • 32 GB capacity powers Dell PowerEdge 1950 III servers
  • 8 x 4 GB modules fill every slot for full density
  • DDR2 667 MHz speed matches PC2-5300 spec
  • Fully buffered FBDIMM design ensures signal integrity
  • 240-pin form factor fits factory memory sockets

Specifications

Capacity32GB (8 x 4GB)
Type240-Pin DDR2 SDRAM

Questions about this item

What speed does the PC2-5300 FBDIMM interface actually run at?

The modules operate at 667MHz, which is the rated speed for PC2-5300 DDR2 fully buffered memory.

How many 240-pin DIMM slots are needed to install all eight modules?

The kit contains eight 4GB sticks, so you need eight free 240-pin DDR2 FBDIMM slots in the server.

Do the modules have to be installed in matched pairs for the PowerEdge 1950 III?

Yes, the 1950 III requires FBDIMMs to be populated in identical pairs per channel, so install the eight modules as four matched pairs.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.