MediaPack4All 12.5mm Blu-Ray Case Multi-Three Storing Capacity
- 2.4892 L x 18.2118…
- 1 Year Warranty
$13.99
0.0001628BTC
In stock
DELL
DELL 3.84TB Enterprise SSD 7450 Pro NDK2D-CP1
A 3.84 TB enterprise NVMe SSD built for read-intensive workloads in Dell PowerEdge servers
- InterfaceDoes Not Apply
- 84 TB capacity supports data-intensive workloads
- NVMe Gen4 interface accelerates read-intensive applications
- TLC NAND balances endurance and cost efficiency
- 5 inch form factor fits standard server bays
- Compatible with PowerEdge R640 R740XD R750 R760 and more
3.84 TB enterprise NVMe SSD
The Dell 7450 Pro NDK2D-CP1 is a 3.84 TB solid-state drive built for data-centre workloads. It uses NVMe transport over a PCIe Gen4 link and TLC NAND rated for read-intensive endurance. The 2.5 inch form factor fits standard hot-swap bays in compatible PowerEdge servers.
Sustained read-intensive endurance
TLC flash and the read-intensive rating mean the drive maintains consistent throughput during long sequential reads without the write-heavy throttling seen on mixed-use models. Firmware updates supplied by the vendor keep latency predictable across the device lifespan. Steady-state performance suits caching tiers, content delivery and log aggregation.
PCIe Gen4 bus ceiling
The NVMe Gen4 interface caps maximum throughput at the electrical limits of a PCIe 4.0 x4 lane, so the drive cannot exceed that bandwidth regardless of controller headroom. System backplanes or risers wired for fewer lanes will reduce the practical ceiling further. Compatibility is validated across the listed PowerEdge platforms only.
Highlights
- 84 TB capacity supports data-intensive workloads
- NVMe Gen4 interface accelerates read-intensive applications
- TLC NAND balances endurance and cost efficiency
- 5 inch form factor fits standard server bays
- Compatible with PowerEdge R640 R740XD R750 R760 and more
Specifications
| Brand | Dell |
|---|---|
| Model | MTFDKCC3T8TFR-1BC1ZABDA, NDK2D |
| Interface | Does Not Apply |
Questions about this item
How much power does the 3.84TB 7450 Pro draw under sustained load?
The 7450 Pro is a 2.5-inch NVMe SSD rated for read-intensive workloads; power draw varies with queue depth and the host server's thermal design.
What server slot or carrier is required to install this drive?
It fits the 2.5-inch NVMe bays found in Dell PowerEdge servers such as the R650, R750, R760 and MX750C.
Will the 7450 Pro work in an older PowerEdge R640?
Yes, the R640 is listed among the compatible platforms for this 3.84TB NVMe SSD.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
