DELL
DELL 1610HD Projector Lamp 225W 330-6581
A 225 W replacement lamp module with housing for the Dell 1610HD projector, rated 3,000 hours normal or 4,000 hours economy
- TypeProjector Lamp
- Wattage225W
- Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
- Ready to install with pre-assembled housing
- 225 W Philips P-VIP lamp inside
- 3,000 hours normal mode lamp life
- Up to 4,000 hours in economy mode
- Built to ISO 9001 quality standards
Dell 1610HD Replacement Lamp
This new 225W projector lamp module fits the Dell 1610HD projector. It arrives as a fully assembled Philips P-VIP bulb inside its housing, so no separate parts are required. The unit is built to ISO9001 standards and tested for beam performance, ignition, voltage, appearance, connections and run-time. It suits owners who need a direct, ready-to-install replacement.
Upgrade from a dim or expired original lamp
The lamp delivers 3000 hours in normal mode and 4000 hours in economy mode, restoring full brightness to the projector. The jump is worth it when the existing lamp has reached its rated life or when image quality has faded below usable levels. It is not for users who need a higher-wattage module or a different projector model.
Simple housing swap
Installation consists of removing the old lamp housing and inserting the new module until it seats securely. The pre-assembled design eliminates bulb-to-housing alignment steps. What usually goes wrong is forgetting to reset the projector's lamp-hour counter after fitting the new unit, which can trigger premature replacement warnings.
Highlights
- Ready to install with pre-assembled housing
- 225 W Philips P-VIP lamp inside
- 3,000 hours normal mode lamp life
- Up to 4,000 hours in economy mode
- Built to ISO 9001 quality standards
Specifications
| Brand | Dell |
|---|---|
| Type | Projector Lamp |
| Wattage | 225W |
| Lamp Life | 3,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
Does the 330-6581 lamp module include the housing so I can install it directly?
Yes, the 330-6581 module arrives as a fully assembled bulb and housing, ready for direct installation in the Dell 1610HD projector without extra assembly steps.
What is the correct sequence to replace the 225 W lamp in the 1610HD?
Power off the projector, let it cool completely, remove the lamp cover, unscrew the old module, insert the new 330-6581 module until it seats firmly, replace the screws and cover, then reset the lamp timer in the menu.
How many hours can I expect from the Philips P-VIP 225 W bulb before replacement?
The Philips P-VIP 225 W bulb is rated for 3000 hours in normal mode and 4000 hours in economy mode, so plan a replacement after reaching those limits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



