We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2.5 inch SAS hard drive mounted in a black Dell caddy

DELL

DELL 1.8TB SAS 2.5" 10K 12G internal hard drive

SKU CH-G73M-JQA6T

A 1.8 TB 10K SAS drive in a 2.5 inch form factor with a compatible caddy for Dell PowerEdge servers

  • 8TB capacity stores large datasets on a single drive
  • 10K RPM spindle delivers fast sequential and random access
  • SAS 12G interface provides high-throughput connectivity
  • 5-inch form factor fits dense server chassis
  • Supplied caddy enables direct installation in compatible Dell PowerEdge servers

1.8TB SAS 10K Server Drive

This new 1.8TB SAS hard drive spins at 10K RPM and uses a 12G interface in a 2.5 inch form factor. It ships with a compatible Dell caddy for direct installation. The drive targets administrators who need reliable rotational storage for supported Dell PowerEdge servers.

Fits listed PowerEdge models only

The included caddy matches the drive bays of the R210, R220, R230, R310, R320, R330, R410, R415, R420, R430, R510, R515, R530XD, R610, R620, R630, R710, R715, R720, R720XD, R730, R730XD, R805, R810, R815, R820, R830, R900, R905, R910, R920 and R930. Buyers with servers outside this list or with 3.5 inch only bays cannot use this assembly.

12G SAS interface decides compatibility

The drive communicates over a 12G SAS link, so the host backplane and controller must support that speed for full performance. If the system only provides a slower SAS generation, the drive will still function but at the lower rate. Verify the controller specification before purchase.

Highlights

  • 8TB capacity stores large datasets on a single drive
  • 10K RPM spindle delivers fast sequential and random access
  • SAS 12G interface provides high-throughput connectivity
  • 5-inch form factor fits dense server chassis
  • Supplied caddy enables direct installation in compatible Dell PowerEdge servers

Specifications

No published specifications for this item yet.

Questions about this item

What does the 12G SAS interface cap the transfer rate at in practice?

The 12G SAS link supports up to 12 Gbps, but sustained throughput is limited by the 10K RPM mechanical speed of this 1.8TB drive.

Which Dell caddy is required to mount this 2.5" drive in the listed PowerEdge servers?

The drive ships with a compatible Dell caddy that fits R210 through R930 models including R220, R330, R420, R530XD, R630, R720XD, R730XD and R820.

How is the drive installed in a PowerEdge chassis, and what step is often missed?

Slide the caddied drive into the hot-swap bay until the latch clicks, then verify the controller recognises the 1.8TB volume before initialising the array.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.