We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
2.5 inch SAS hybrid drive in silver metal caddy

DELL

DELL 1.2TB SAS 2.5" 10K 12G Hybrid internal hard drive

SKU CH-73KE-035SW

1.2TB SAS 2.5-inch 10K 12G hybrid drive with Dell server caddy for PowerEdge R210 through R930 models

  • 2 TB capacity stores large datasets
  • 10K RPM spindle delivers fast data access
  • SAS 12 Gbps interface enables high-throughput transfers
  • 5 inch form factor fits dense server bays
  • Supplied caddy fits Dell PowerEdge R210 through R930 servers

DELL 1.2 TB SAS Hybrid Drive

This 1.2 TB SAS hybrid drive fits 2.5 inch bays and spins at 10K RPM with a 12 Gbit SAS interface. It ships new with a compatible Dell caddy for direct installation in supported PowerEdge servers. The drive is designed for enterprise storage workloads that demand high throughput and low latency.

Suits Dell PowerEdge R210 through R930 servers

Administrators upgrading or replacing drives in listed PowerEdge models from R210 to R930 will find a direct mechanical and electrical match. Builders working with non-Dell chassis, different drive form factors, or interfaces other than SAS should evaluate other options.

12 Gbit SAS interface decides compatibility

The single specification that determines fit is the 12 Gbit SAS interface combined with the 2.5 inch 10K RPM form factor. Only systems that accept this exact interface and physical layout can use the drive without adapters or backplane changes.

Highlights

  • 2 TB capacity stores large datasets
  • 10K RPM spindle delivers fast data access
  • SAS 12 Gbps interface enables high-throughput transfers
  • 5 inch form factor fits dense server bays
  • Supplied caddy fits Dell PowerEdge R210 through R930 servers

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 1.2TB SAS 2.5" 10K 12G Hybrid drive into a Dell R730 server?

Slide the drive into the supplied Dell caddy until the connector seats firmly, then insert the caddy into the hot-plug bay until the latch clicks. The step often missed is pushing the caddy past the detent so the SAS backplane pins fully engage.

What maintenance or replacement will this 1.2TB SAS 10K drive need over time?

Mechanical 10K RPM drives eventually develop bearing wear or media errors; plan to replace the unit when SMART reallocated-sector counts rise or latency spikes appear during sustained I/O.

What performance limit appears first on this 1.2TB SAS 12G Hybrid drive under sustained write workloads?

The 10K RPM spindle caps sustained throughput near the media's sequential write ceiling, so latency climbs once the write cache fills and the drive must wait for physical rotation.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.