We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2.5 inch enterprise SAS hard drive with label

DELL

DELL 0VPTJ 1.8TB 10K SAS 6Gbps 2.5" internal hard drive

SKU CH-4197-FTMX7 MPN 0VPTJ

A 1.8 TB enterprise SAS drive spinning at 10 000 RPM in a 2.5 inch form factor

  • InterfaceSAS 6Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • UsageFor Enterprise Storage
  • Form Factor2.5"
  • 8 TB capacity supports large enterprise datasets
  • 10 000 RPM spindle delivers fast transactional throughput
  • SAS 6 Gb/s interface provides reliable dual-port connectivity
  • 5 inch form factor fits dense server chassis
  • New condition ensures full manufacturer specification compliance

Enterprise 1.8TB SAS Drive

This 2.5 inch internal hard drive delivers 1.8TB of storage over a SAS 6Gb/s interface. It spins at 10000 RPM and is built for enterprise storage workloads. The drive is supplied in new condition.

Suited For High-IOPS Arrays

It fits servers and storage arrays that require a 10K SAS spindle for transactional databases or virtualisation hosts. Buyers needing larger capacity per spindle or solid-state latency should evaluate other media. Systems limited to SATA-only backplanes cannot use this drive.

SAS 6Gb/s Interface Decides Fit

The controller or backplane must provide a SAS 6Gb/s connection to operate this unit. A SATA-only port will not recognise the drive. Verify the host interface before purchase.

Highlights

  • 8 TB capacity supports large enterprise datasets
  • 10 000 RPM spindle delivers fast transactional throughput
  • SAS 6 Gb/s interface provides reliable dual-port connectivity
  • 5 inch form factor fits dense server chassis
  • New condition ensures full manufacturer specification compliance

Specifications

InterfaceSAS 6Gb/s
Capacity1.8TB
RPM10000 RPM
UsageFor Enterprise Storage
Form Factor2.5"

Questions about this item

How much heat and noise does the 10000 RPM SAS drive add when it runs continuously in a server?

The 1.8TB 10K RPM SAS 6Gb/s drive is rated for enterprise storage workloads and uses the standard 2.5-inch form factor; its power draw and acoustics follow Dell's specifications for this model.

What controller and cables are required to connect this 2.5-inch SAS drive to an existing system?

A SAS host bus adapter or RAID controller with internal Mini-SAS ports and matching cables is needed; the drive plugs into a standard 2.5-inch SAS backplane or drive bay.

Will this 1.8TB 10K SAS drive work in a chassis that currently holds 2.5-inch SATA drives?

The drive fits the same 2.5-inch bays, but the backplane and controller must support SAS 6Gb/s signalling; SATA-only backplanes will not operate this drive.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.