Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.0093777BTC
In stock
Delhi
Delhi 12 In Hazardous Location Exhaust Fan Accessory
Explosion-proof 12 in shutter-mounted exhaust fan delivers 640 CFM at 115/208-230 V single-phase power
- typeClosed Base
- Explosion-proof motor rated for hazardous locations
- 640 CFM airflow at zero static pressure
- Single-phase 115/208-230 V operation
- Ball-bearing motor runs at 1,725 RPM
- 16-inch mounting hole centres simplify installation
Hazardous-location exhaust accessory
The CANARM SD12-XPF is a shutter-mounted exhaust fan rated for hazardous locations and built around a 12-inch propeller. It delivers 640 cfm at zero static pressure and operates on 115 V or 208-230 V single-phase power at 60 Hz. The explosion-proof motor enclosure and Class B insulation suit industrial environments where flammable gases or dust may be present.
Sustained-load behaviour
The 1/3 hp ball-bearing motor runs at 1,725 rpm and draws 6.6 amps at 115 V or 3.3 amps at 208-230 V while consuming 250 watts. Its fan-cooled, explosion-proof enclosure is rated for continuous operation in ambient temperatures up to 104 °F, so airflow remains stable during extended duty cycles without thermal derating.
Pre-installation checks
Verify that your supply voltage matches either 115 V or 208-230 V single-phase and that the circuit can handle the corresponding full-load current. Confirm the mounting surface accommodates the 16-inch on-centre hole pattern and the overall footprint of 17 1/4 by 17 1/4 inches with a 20 1/2-inch depth clearance. Ensure local codes permit hazardous-location equipment of this classification.
Highlights
- Explosion-proof motor rated for hazardous locations
- 640 CFM airflow at zero static pressure
- Single-phase 115/208-230 V operation
- Ball-bearing motor runs at 1,725 RPM
- 16-inch mounting hole centres simplify installation
Specifications
| Brand | CANARM |
|---|---|
| type | Closed Base |
Questions about this item
How much power does the 250 W motor draw on a 115 V circuit?
The motor draws 6.6 A at 115 V, producing 640 CFM at 0.000 in. SP while running at 1,725 RPM.
What mounting pattern must the wall opening match?
Mounting holes are spaced 16 in. on centre; the fan housing is 17 1/4 in. high by 17 1/4 in. wide with a maximum depth of 20 1/2 in.
Can the explosion-proof motor operate in a 104 °F ambient alongside older 60 Hz single-phase wiring?
Yes, the Class B insulated motor is rated for 104 °F max ambient and runs on 115/208-230 V, 60 Hz, single-phase supply.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
