We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PLA+ filament on a cardboard spool, 1.75mm diameter

Deeplee PLA+ 1.75mm Filament 2kg White

SKU CH-39MR-N7VW2

Stronger, dimensionally accurate 1.75 mm PLA+ filament on a 2 kg spool for reliable FDM printing

  • Color2*white
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight2 kilograms
  • Stronger and more durable prints with PLA+ toughness
  • Consistent feeding from ±0.02 mm dimensional accuracy
  • Tangle-free spooling via mechanical winding and manual check
  • Smooth extrusion and vivid colour from high-quality pigments
  • Moisture-protected filament in vacuum-sealed cardboard spool

2 kg PLA+ spool for FDM printers

This Deeplee PLA+ filament comes in a 2 kilogram white spool with a 1.75 mm diameter. It is made from polylactic acid modified for higher strength and toughness than standard PLA. The material suits makers who need durable functional parts or clean decorative prints on most FDM machines.

Upgrade from basic PLA when parts must handle stress

Compared with ordinary PLA, this Plus grade offers increased mechanical strength and tighter dimensional accuracy of ±0.02 mm. The jump is worth it when prints must withstand handling, load or repeated assembly without cracking or warping.

Drop-in install; keep the spool dry

The filament is mechanically wound and manually inspected to prevent tangles, so it feeds straight from the cardboard spool. Vacuum-sealed packaging keeps moisture out, but once opened the material absorbs humidity quickly; store it sealed with desiccant to avoid clogging or bubbles.

Highlights

  • Stronger and more durable prints with PLA+ toughness
  • Consistent feeding from ±0.02 mm dimensional accuracy
  • Tangle-free spooling via mechanical winding and manual check
  • Smooth extrusion and vivid colour from high-quality pigments
  • Moisture-protected filament in vacuum-sealed cardboard spool

Specifications

BrandDeeplee
Color2*white
MaterialPolylactic Acid
Diameter1.75
Weight2 kilograms

Questions about this item

Will the 1.75 mm diameter spool fit my printer's filament holder?

The filament is 1.75 mm in diameter and wound on a cardboard spool; verify your printer accepts that diameter and spool format before purchasing.

What nozzle temperature should I set for the first layer to avoid under-extrusion?

Start at 205 °C and adjust within the 205–230 °C range; printing too cold is the most common cause of poor first-layer adhesion with this PLA+.

How should I store the 2 kg spool after opening to keep it printable?

Reseal the vacuum bag with a desiccant pack; PLA+ absorbs moisture over time and will need drying if left exposed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.