We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bolt-on horn flare with two-inch throat

Deejay LED

Deejay LED Green Bolt-on Horn Flare 2-in Throat

SKU CH-7S51-E098P

Green bolt-on horn flare with a two-inch throat for compatible high-frequency drivers

  • Green bolt-on design simplifies driver mounting
  • 2-inch throat matches standard high-frequency drivers
  • Bright green finish adds visual identification on stage
  • Made in the United States for domestic production
  • First listed by manufacturer in December 2022

Green bolt-on horn flare for 2-inch throat

The Deejay LED Green Bolt-on Horn Flare attaches directly to any 2-inch compatible high-frequency driver. Its bolt-on design secures the flare without adhesives or specialised tooling. Installers and system integrators can mount it quickly in fixed installations or portable cabinets. The green finish provides visual identification in multi-driver arrays.

Passive acoustic component with no power draw

The horn flare operates without electricity, fans or active circuitry, so it adds zero thermal load and produces no audible noise of its own. Acoustic output depends entirely on the driver it is coupled to. Because it draws no power, it imposes no demand on amplifiers or venue electrical circuits.

Bolt-on mounting simplifies driver changes

The supplied bolt-on hardware lets technicians swap or service the compression driver without removing the flare from the enclosure. No separate gaskets, adhesives or alignment jigs are included in the package. The flare ships ready to install on any 2-inch throat driver that matches the bolt pattern.

Highlights

  • Green bolt-on design simplifies driver mounting
  • 2-inch throat matches standard high-frequency drivers
  • Bright green finish adds visual identification on stage
  • Made in the United States for domestic production
  • First listed by manufacturer in December 2022

Specifications

No published specifications for this item yet.

Questions about this item

How do I bolt the 2-inch throat horn flare onto my compression driver without stripping the threads?

Align the four mounting holes with the driver flange, start each bolt by hand, then tighten in a cross pattern to the driver manufacturer's torque spec so the green flare seats evenly.

What upkeep does the green horn flare need after months of outdoor gigs?

Wipe the flare surface with a damp cloth to remove dust and moisture; check the mounting bolts for corrosion and re-tighten if they have loosened from vibration.

At what sound-pressure level does the 2-inch throat start to compress on long sets?

The horn itself has no rated compression threshold; sustained output limits are set by the matched high-frequency driver's thermal and excursion capabilities.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.