We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White carpeted speaker enclosure with two 183mm woofer cutouts, two 95mm tweeter holes and one 145mm horn opening

Deejay LED

Deejay LED D8T2H1WHITE empty speaker enclosure white

SKU CH-RPKB-WBMAN

Empty speaker enclosure with three sealed chambers, dual quad ports, 12 mm plywood construction, and pre-cut openings for two 8 in woofers, two tweeters, and one horn

  • Ready for dual 8-inch woofers with 183mm cut-outs
  • Tweeter-ready with two 95mm diameter openings
  • Horn-loaded design via single 145mm aperture
  • Rigid 12mm plywood build with three sealed chambers
  • Quick-release 8-pin socket simplifies driver wiring

Ready-to-assemble speaker enclosure

This empty cabinet is built for two 8-inch woofers, two tweeters and one horn driver. Three sealed internal chambers each have a quad port for the woofers. The box uses 12 mm plywood with heavy-duty carpet and an embroidered logo.

DIY audio builders and installers

It suits anyone who wants to choose their own drivers and crossover for a custom PA or club system. Buyers who need a complete plug-and-play speaker with amplification or DSP built in should look elsewhere.

Pre-wired 8-pin quick-release socket

The enclosure includes a DEEJAY LED 8-conductor plug that accepts a TBH8PINMALE or Speakon 8-pin connector, neither of which is supplied. This lets you connect your amplifier without soldering once the drivers are installed.

Highlights

  • Ready for dual 8-inch woofers with 183mm cut-outs
  • Tweeter-ready with two 95mm diameter openings
  • Horn-loaded design via single 145mm aperture
  • Rigid 12mm plywood build with three sealed chambers
  • Quick-release 8-pin socket simplifies driver wiring

Specifications

No published specifications for this item yet.

Questions about this item

What drivers do I need to buy to fit the 183 mm woofer cutouts and 95 mm tweeter holes?

You need two 8-inch woofers that match the 183 mm openings, two tweeters suited to the 95 mm diameter holes, and one horn driver for the 145 mm opening.

Will my existing SpeakON 8-pin cables connect directly to the installed socket?

Yes, the enclosure includes an 8-conductor quick-release plug socket that accepts standard SpeakON 8-pin female plugs without an adapter.

How can I verify the three sealed chambers and quad ports are loading each woofer correctly after assembly?

Measure the impedance at the socket with a multimeter; each woofer chamber should show its own distinct resonance dip, confirming the separate tuning.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.