We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red and black power cables with fuse holder and assorted terminals and wires

Deejay LED

Deejay LED Amplifier Install Kit 0-AWG CCA 200A Fuse

SKU CH-1AR4-C93T0

Complete amplifier installation kit with 0-AWG CCA power and ground cables, speaker wire, RCA cable, turn-on lead, ANL fuse holder and 200 A fuse, plus terminals, insulators, split loom and wire ties

  • Complete installation kit for high-power car amplifiers
  • 17 ft #0-AWG CCA power wire delivers strong current flow
  • 200 A ANL fuse protects wiring from overload damage
  • 17 ft RCA and 18 ft turn-on leads carry clean signals
  • 17 ft #12-AWG speaker wire plus terminals and loom finish the job

Complete Amplifier Wiring Kit

This kit supplies every cable and connector needed to install a high-powered amplifier in a car or truck. It includes 17-foot runs of 0-AWG power wire, 12-AWG speaker wire, RCA interconnects and 18-AWG turn-on lead plus a 3-foot 0-AWG ground wire. An ANL fuse holder and 200 amp fuse protect the main power circuit. Ring terminals, spade terminals, insulators, split loom and wire ties finish the installation.

Installers Who Need One-Box Convenience

The package suits anyone wiring a single amplifier who wants all conductors, protection and hardware in one purchase. It is not for systems that require multiple amplifier feeds or separate distribution blocks. Buyers needing pure copper conductors rather than copper-clad aluminium should look elsewhere. The fixed 17-foot power and signal lengths may not reach batteries mounted far from the amplifier location.

0-AWG CCA Main Power Conductors

The power and ground wires use 0-AWG copper-clad aluminium rated for a 200 amp ANL fuse. This conductor size and material set the maximum safe current the kit can deliver to the amplifier. The 12-AWG speaker wire and 18-AWG turn-on lead handle their respective low-current roles. No other gauge or conductor type is included for the primary power path.

Highlights

  • Complete installation kit for high-power car amplifiers
  • 17 ft #0-AWG CCA power wire delivers strong current flow
  • 200 A ANL fuse protects wiring from overload damage
  • 17 ft RCA and 18 ft turn-on leads carry clean signals
  • 17 ft #12-AWG speaker wire plus terminals and loom finish the job

Specifications

No published specifications for this item yet.

Questions about this item

What cables and hardware are included in the Deejay LED amplifier install kit?

The kit includes 17-Ft. #0-AWG red power wire, 3-Ft. #0-AWG black ground wire, 17-Ft. #12-AWG two-color speaker wire, 17-Ft. RCA wire, 17-Ft. #18-AWG turn-on wire, ANL fuse holder, 200 AMP ANL fuse, 3-Ft. split loom, two #0-AWG ring terminals, two #0-AWG spade terminals, four #12-AWG spade terminals, insulators and ten wire ties.

How do I choose the right gauge for my amplifier installation?

The #0-AWG CCA power and ground cables suit high-current amplifiers up to 200 amps, while the #12-AWG speaker wire handles typical speaker loads and the #18-AWG turn-on wire carries the low-current remote signal.

What does the 200-amp fuse rating mean for my system?

The 200 AMP ANL fuse protects the #0-AWG CCA power cable by breaking the circuit if current exceeds 200 amps, preventing cable damage or fire during a short circuit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.