We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow utility-grade autobody masking tape, 36 rolls in a case

Decker Tape Products, Inc.

Decker Tape Products, Inc. Yellow Utility Grade Autobody Masking Tape 1" x 60 Yd Case of 36 Rolls

SKU CH-9EGN-RDMEG

Yellow utility-grade masking tape for autobody painting, natural rubber adhesive removes cleanly, withstands up to 320°F, case of 36 rolls

  • Natural rubber adhesive leaves no residue after removal
  • 7 mil thickness handles demanding autobody masking tasks
  • 16 oz/in adhesion holds firmly through paint cycles
  • 25 lbs/in tensile strength resists tearing during application
  • Withstands 320°F for short bake cycles up to 2 minutes

Product and Intended Use

This yellow utility-grade autobody masking tape is designed for car repair and painting applications. The natural rubber adhesive works with both solvent-based and water-based paints. A case contains 36 rolls, each measuring 1 inch by 60 yards. The yellow colour gives clear contrast against vehicle surfaces during preparation.

Capacity and Temperature Performance

Each roll provides 60 yards of 5.7 mil thick tape with a tensile strength of 25 lbs/in and adhesion of 16 oz/in. The tape withstands continuous temperatures from 0 to 248 degrees Fahrenheit. It also tolerates short exposure up to 320 degrees Fahrenheit for less than two minutes during bake cycles. Elongation is rated at 8 percent.

Adhesive Limits and Removal

The natural rubber adhesive is formulated to leave no residue after removal from painted surfaces. Performance is reliable within the stated temperature range and during typical automotive refinishing processes. The tape is waterproof, suiting demanding shop environments. It is not intended for applications requiring higher heat resistance or longer dwell times beyond the specified limits.

Highlights

  • Natural rubber adhesive leaves no residue after removal
  • 7 mil thickness handles demanding autobody masking tasks
  • 16 oz/in adhesion holds firmly through paint cycles
  • 25 lbs/in tensile strength resists tearing during application
  • Withstands 320°F for short bake cycles up to 2 minutes

Specifications

BrandThe Tape Supplies Shop

Questions about this item

Will the 1-inch width match the masking lines I already use on older panels?

Yes — each roll is 1 inch wide and 60 yards long, so it fits the same masking lines you currently run on existing panels.

How can I confirm the 5.7 mil tape is holding during a 320 °F bake cycle?

Press the tape firmly after application; if it stays bonded through the short high-heat cycle and peels cleanly with no residue, the 16 oz/in adhesion and 25 lbs/in tensile strength are performing as specified.

Does the case include 36 individual rolls or a single 36-roll spool, and do I need a separate dispenser?

The case contains 36 separate 1-inch by 60-yard rolls; no dispenser is included, so you will need your own hand-held or bench dispenser.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.