We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 144 rolls of green polyester powder coating tape, 1/4 inch wide by 72 yards long

Decker Tape Products, Inc.

Decker Tape Products, Inc. Green Polyester Powder Coating Tape 1/4" x 72 Yd Case of 144 Rolls

SKU CH-0WNN-0TM2V

Green polyester tape with silicone adhesive withstands 400 °F bake cycles and removes cleanly for powder coating and high-temperature masking

  • Withstands bake cycles up to 400°F with clean removal
  • 7,000-volt dielectric strength insulates during high-temp processes
  • 50 lbs/in tensile strength resists tearing on sharp edges
  • 5 mil thickness balances conformability and durability
  • 144-roll case supplies volume powder-coating operations

Industrial Powder Coating Masking

This green polyester tape is engineered for powder coating, e-coating and anodizing lines where clean removal after high-temperature bake cycles is critical. The silicone adhesive withstands up to 400? F and leaves no residue on metal substrates. Each roll measures 1/4" wide by 72 yards long, and the case contains 144 rolls for high-volume production runs.

Sustained High-Temperature Performance

The tape operates continuously across a range of -99.4? to 392? Fahrenheit without adhesive failure or backing degradation. Tensile strength of 50 lbs/in and 100% elongation allow the film to conform to complex profiles while resisting tear during handling. Dielectric strength of 7000 volts adds electrical insulation capability for masking during combined thermal and electrical processes.

Replaces General-Purpose Masking Tapes

Standard crepe or vinyl tapes cannot survive repeated 400? F cycles and often leave adhesive residue that requires secondary cleaning. This product eliminates that rework step for shops running daily powder coating batches. Facilities that only need occasional low-temperature masking will not justify the cost per roll.

Highlights

  • Withstands bake cycles up to 400°F with clean removal
  • 7,000-volt dielectric strength insulates during high-temp processes
  • 50 lbs/in tensile strength resists tearing on sharp edges
  • 5 mil thickness balances conformability and durability
  • 144-roll case supplies volume powder-coating operations

Specifications

BrandThe Tape Supplies Shop

Questions about this item

How does the 3.5 mil tape handle heat during a full-day powder-coating run?

The silicone adhesive withstands bake-cycle temperatures up to 400°F and the tape remains stable across a -99.4°F to 392°F range, so it will not melt or leave residue during continuous high-temperature use.

What surface preparation or substrate do I need before applying this 1/4" green polyester tape?

Apply directly to clean, dry metal or coated parts; the 30 oz/in silicone adhesive bonds without primer and removes cleanly after the bake cycle.

Will the 50 lbs/in tensile strength hold when masking edges on older anodized aluminium frames?

Yes, the 50 lbs/in tensile strength and 100% elongation let the tape conform to aged anodized profiles without tearing or lifting during high-temperature processing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.