We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green polyester powder coating tape rolls in a case of 72

Decker Tape Products, Inc.

Decker Tape Products, Inc. Green Polyester Powder Coating Tape 1/2" x 72 Yd Case of 72 Rolls

SKU CH-SF74-XK8GA

Green polyester tape for powder coating withstands 392 °F, removes cleanly after 400 °F bake cycles, and delivers 50 lbs/in tensile strength with 30 oz/in adhesion

  • Withstands bake cycles up to 400°F with clean removal
  • 50 lbs/in tensile strength handles demanding masking jobs
  • 7000 volt dielectric strength protects during electrical processes
  • 72 rolls per case supply high-volume operations
  • Resists acids, oils, solvents and staining in harsh environments

Powder Coating Tape 1/2" x 72 Yd Case

This green polyester tape is built for powder coating and other high-temperature finishing processes. It suits industrial shops and fabricators who need reliable masking during bake cycles. The silicone adhesive withstands temperatures up to 400 degrees Fahrenheit and removes cleanly afterwards. Each case supplies 72 rolls for continuous production runs.

Silicone Adhesive and Dielectric Performance

The cured silicone adhesive delivers 30 oz/in adhesion and 50 lbs/in tensile strength while resisting acids, oils, solvents and staining. Dielectric strength reaches 7000 volts for electrical insulation tasks. The 3.5 mil film handles elongation of 100 percent without tearing. Compliance with EU RoHS and REACH regulations supports regulated manufacturing environments.

Easy Application and Clean Removal

The tape applies smoothly to prepared surfaces and conforms to complex shapes during masking. Bake cycles up to 400 degrees Fahrenheit do not degrade the adhesive bond or leave residue on removal. Improper surface cleaning can reduce adhesion, so substrates should be free of contaminants before use. Storage within the rated -99.4 to 392 degrees Fahrenheit range preserves performance.

Highlights

  • Withstands bake cycles up to 400°F with clean removal
  • 50 lbs/in tensile strength handles demanding masking jobs
  • 7000 volt dielectric strength protects during electrical processes
  • 72 rolls per case supply high-volume operations
  • Resists acids, oils, solvents and staining in harsh environments

Specifications

BrandThe Tape Supplies Shop

Questions about this item

How often will the 3.5 mil polyester film need replacing during repeated powder-coat bake cycles?

The tape is designed to survive bake-cycle temperatures up to 400°F and remove cleanly each time, so replacement depends on how many cycles you run rather than a fixed schedule.

What limit appears first when the tape runs continuously at the top of its 392°F rating?

At sustained high heat the 30 oz/in adhesion and 50 lbs/in tensile strength are the first properties to degrade, so the bond will fail before the film itself breaks down.

How much heat does the roll generate during an all-day masking job in a 400°F oven?

The tape does not produce its own heat; it simply withstands the oven temperature up to 400°F while the silicone adhesive remains stable and the 7000-volt dielectric strength is maintained.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.