Decker Tape Products, Inc.
Decker Tape Products, Inc. Double Coated Adhesive Transfer Tape 3/4" x 60 Yd 5 mil Case of 48 Rolls
Double-coated acrylic transfer tape on a 3/4" × 60 yd roll, 5 mil thick with 72 oz/in adhesion and a 10–250 °F range, supplied in a 48-roll case
- Strong initial bond from 72 oz/in acrylic adhesive
- Handles heat from 10 °F to 250 °F
- Bonds dissimilar surfaces with unsupported acrylic layer
- 60-yard rolls give long continuous runs
- Case of 48 rolls supports high-volume work
3/4" Double Coated Transfer Tape
This acrylic adhesive transfer tape measures three-quarters of an inch wide by sixty yards long and comes in a case of forty-eight rolls. It is designed for printing-industry tasks such as laminating, holding glossy or difficult paper stocks, and gap filling.
Unsupported acrylic construction
The unsupported acrylic film is four mils thick and delivers seventy-two ounces per inch of adhesion across a temperature range of ten to two hundred fifty degrees Fahrenheit. It bonds to many dissimilar surfaces and provides good shear holding power with high initial tack.
High-volume print and assembly users
Shops that need a consistent, high-tack transfer tape for continuous laminating or mounting work will find the bulk case practical. Buyers who require a supported carrier, a different adhesive chemistry, or smaller roll quantities should consider other options.
Highlights
- Strong initial bond from 72 oz/in acrylic adhesive
- Handles heat from 10 °F to 250 °F
- Bonds dissimilar surfaces with unsupported acrylic layer
- 60-yard rolls give long continuous runs
- Case of 48 rolls supports high-volume work
Specifications
| Brand | The Tape Supplies Shop |
|---|
Questions about this item
What width roll and core size does this 3/4" x 60 Yd tape need for my dispenser?
Each roll is 3/4 inch wide and 60 yards long on a standard 3-inch core, so a desktop dispenser that accepts 3/4 inch tape on a 3-inch core will fit.
How do I apply this double-coated transfer tape without trapping air bubbles?
Peel the liner, press the exposed adhesive onto the first surface, then roll the second surface down firmly with a roller or squeegee from the centre outward to remove trapped air.
When should I replace a roll that has been stored near a heat source?
The acrylic adhesive is rated from 10 to 250 degrees Fahrenheit; if storage exceeded 250 °F or the tape shows discolouration, brittleness or adhesion loss, discard the roll.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Zoro Select Probe Covers 15-617-000 PK500 Transparent
- Transparent
HealthSmart 18-220-000 Infrared Digital Thermometer Gray/White
- Gray/White
HealthSmart Foods, Inc. 04-655-001 Digital Blood Pressure Monitor Arm Adult Black
- Black



