We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 144 clear polyester film tape rolls, 1/4 inch wide, 72 yards each

Decker Tape Products, Inc.

Decker Tape Products, Inc. Clear Polyester Film Tape 1/4" x 72 Yd Case of 144 Rolls

SKU CH-JGRR-H83FX

Clear polyester film tape with rubber adhesive, 1.6 mil thick, 18 oz/in adhesion, 34 lbs/in tensile strength, 120% elongation, 32-176°F range, 72 yards per roll, case of 144 rolls

  • Reliable hold with 18 oz/in rubber adhesive strength
  • Thin 1.6 mil film handles cleanly without bulk
  • Strong 34 lbs/in tensile resists tearing under stress
  • Works from 32° to 176°F for varied environments
  • 144 rolls of 72 yards each for high-volume supply

Clear Polyester Film Tape for Packaging

This clear polyester film tape is designed for temporary holding of credit cards to mailers, edge splicing, and tape hinge applications. It comes in a case of 144 rolls, each measuring 1/4" wide by 72 yards long. The tape uses a rubber adhesive system approved for indirect food contact. It suits mailrooms, fulfilment centres, and light industrial packing lines.

Thermal Range and Adhesion Performance

The tape operates reliably across a temperature range of 32 to 176 degrees Fahrenheit. Its rubber adhesive delivers 18 oz/in of adhesion while the 1.6 mil thick film provides a tensile strength of 34 lbs/in. An elongation of 120 percent allows the tape to stretch without breaking during application. These properties maintain consistent holding power in varied environments.

Integration into Packing Workflows

Each roll fits standard hand-held dispensers for quick, single-handed use. The narrow quarter-inch width applies cleanly to small surfaces such as card corners or document edges. The clear film leaves printed information visible underneath. A 144-roll case reduces reorder frequency for high-volume operations.

Highlights

  • Reliable hold with 18 oz/in rubber adhesive strength
  • Thin 1.6 mil film handles cleanly without bulk
  • Strong 34 lbs/in tensile resists tearing under stress
  • Works from 32° to 176°F for varied environments
  • 144 rolls of 72 yards each for high-volume supply

Specifications

BrandThe Tape Supplies Shop

Questions about this item

How do I apply the 1/4" wide polyester film tape so the rubber adhesive bonds properly?

Clean the surface, then press the 1.6 mil film down firmly across the full 1/4" width; the step often missed is using enough pressure to activate the 18 oz/in adhesion before the adhesive sets.

When will the rubber adhesive on these rolls need replacement?

The adhesive stays effective within the 32° to 176° F range; if the tape sees temperatures outside that window or the 18 oz/in bond drops after repeated cycles, replace the affected rolls.

What fails first on the 72-yard rolls during continuous high-stress use?

The 34 lbs/in tensile strength is the first limit reached; once sustained load approaches that value the 1.6 mil film will elongate toward its 120% limit and snap.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.