We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 16 clear double-coated polyester tape rolls, 3 inches wide

Decker Tape Products, Inc.

Decker Tape Products, Inc. Clear Double Coated Polyester Tape 3" x 36 Yd Rubber Adhesive Case of 16 Rolls

SKU CH-9Q71-5QC28

Clear double-coated polyester tape with rubber adhesive, 36 yards per roll, 16 rolls per case, 10 lbs/in tensile strength, 90 oz/in adhesion, 50% elongation, 0–180°F range

  • Strong holding power from 90 oz/in rubber adhesive
  • Versatile bonding for paper, foil, fabric and plastics
  • Durable 3 mil polyester film resists tearing
  • Performs reliably across 0° to 180° Fahrenheit
  • Case of 16 rolls supplies 36 yards each

Clear Double-Coated Polyester Tape

This clear double-coated polyester tape uses a rubber adhesive system for mounting nameplates, signs and splicing paper, foil, cork, felt, plastic or fabric. The transparent film provides high tack across a wide range of substrates. It is supplied in a case of sixteen rolls for volume use.

3-Inch Wide Rolls for Continuous Mounting

Each roll measures three inches wide by thirty-six yards long with a three mil thickness. The tape fits standard dispensers and converts sheet materials into bonded assemblies without mechanical fasteners. The rubber adhesive bonds on contact and holds through a zero to one hundred eighty degrees Fahrenheit range.

Sixteen-Roll Case with 90 oz/in Adhesion

The sixteen-roll case delivers ninety ounces per inch of adhesion and ten pounds per inch tensile strength with fifty percent elongation. These figures mean the tape resists shear and peel loads during sign mounting and core startup tasks. No additional primers or activators are required for the listed substrates.

Highlights

  • Strong holding power from 90 oz/in rubber adhesive
  • Versatile bonding for paper, foil, fabric and plastics
  • Durable 3 mil polyester film resists tearing
  • Performs reliably across 0° to 180° Fahrenheit
  • Case of 16 rolls supplies 36 yards each

Specifications

BrandThe Tape Supplies Shop

Questions about this item

How much force can the 10 lbs/in tensile strength withstand before the tape snaps under constant tension?

The tape resists up to 10 pounds per inch of width before breaking, so a three-inch strip holds roughly thirty pounds of steady pull.

Will the rubber adhesive soften or lose grip if the mounted sign sees 180 °F all day?

The adhesive is rated for continuous exposure from 0 °F to 180 °F, so it maintains tack and shear strength at the top of that range.

What surface preparation is needed so the 90 oz/in adhesion bonds securely to a painted metal nameplate?

Clean the metal with isopropyl alcohol, let it dry, then apply firm pressure; the high-tack rubber adhesive reaches full 90 oz/in bond on clean, dry surfaces.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.