We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear polypropylene tape rolls in a cardboard case

Decker Tape Products, Inc.

Decker Tape Products, Inc. Clear 2.0 Mil Polypropylene Tape 1/2" x 72 Yd Case of 72 Rolls

SKU CH-888R-ADW4T

Clear 2.0 mil polypropylene tape with acrylic adhesive holds lids, laminates, tabs and reinforces edges at 20 lbs/in tensile strength and 20 oz/in adhesion

  • Strong hold with 20 lbs/in tensile strength
  • Reliable stick from 20 oz/in acrylic adhesion
  • Performs in 32° to 150° Fahrenheit range
  • Stretches 160% for flexible sealing
  • 0 mil polypropylene film resists tears

Clear 2.0 Mil Polypropylene Tape

This case contains 72 rolls of transparent polypropylene film, each measuring one-half inch wide by 72 yards long. The acrylic adhesive system provides 20 oz/in adhesion and 20 lbs/in tensile strength. It is suited for offices, warehouses and light industrial packing tasks.

Upgrades from thinner film and rubber adhesives

The 2.0 mil thickness and acrylic formulation resist yellowing and embrittlement better than 1.5 mil economy tapes or rubber-based products. The jump is worthwhile when cartons face temperature swings or long shelf life. It is not for users who need heavy-duty strapping or filament reinforcement.

Handles sealing, tabbing and edge reinforcing

The tape operates reliably from 32 to 150 degrees Fahrenheit and stretches 160 percent before breaking, giving headroom for irregular surfaces and thermal cycling. It runs out on pallet-load containment or high-abrasion bundling where thicker filament tape is required.

Highlights

  • Strong hold with 20 lbs/in tensile strength
  • Reliable stick from 20 oz/in acrylic adhesion
  • Performs in 32° to 150° Fahrenheit range
  • Stretches 160% for flexible sealing
  • 0 mil polypropylene film resists tears

Specifications

BrandThe Tape Supplies Shop

Questions about this item

What width dispenser or holder does the 1/2 inch roll require?

The tape measures 1/2 inch wide, so any dispenser or holder with a half-inch core slot will accept the roll.

How do I apply the acrylic adhesive tape so it bonds properly?

Press the tape firmly onto a clean, dry surface at room temperature; the acrylic adhesive reaches full 20 oz/in adhesion after a short dwell time.

When should I replace a roll that has been stored near the 150 °F upper limit?

If rolls have been kept at sustained high heat, check for adhesive softening or loss of the 20 lbs/in tensile strength before use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.