We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen clear double-coated polyester tape rolls in a case

Decker Tape Products, Inc.

Decker Tape Products, Inc. 3" x 60 Yd Clear Double Coated Polyester Tape Acrylic Adhesive Case 16 Rolls

SKU CH-J2NM-7YJCS

Case of 16 rolls, each 60 yards long, with 3.5 mil thickness, 80 oz/in adhesion and 8 lbs/in tensile strength for splicing and mounting tasks

  • Strong hold for splicing with 80 oz/in adhesion
  • 16-roll case keeps production lines supplied
  • Wide -4° to 212° F service range
  • 5 mil polyester resists tearing at 8 lbs/in tensile
  • 10 % elongation absorbs stress on automatic splicers

Double-coated acrylic tape for industrial splicing

This clear polyester tape carries acrylic adhesive on both sides and comes in a case of 16 rolls. Each roll measures three inches wide by 60 yards long. The construction suits holding plastic keyboards, fabric seaming, corrugated liner splicing, automatic splicing machines, name plating, graphic arts and silk-screen work.

Check surface energy and temperature limits before

The adhesive is rated from minus four to 212 degrees Fahrenheit. Verify that the substrates you plan to bond can tolerate this range and that the 3.5 mil thickness fits the gap you need to fill. Confirm the 80 ounces per inch adhesion and 10 percent elongation match the peel and shear demands of your application.

3.5 mil polyester carrier

The film resists tearing at eight pounds per inch while remaining thin enough for tight assemblies. Double coating means both liner and roll sides are tacky, so plan dispensing to avoid premature sticking. Acrylic chemistry provides long-term clarity and UV resistance for indoor graphic and splicing tasks.

Highlights

  • Strong hold for splicing with 80 oz/in adhesion
  • 16-roll case keeps production lines supplied
  • Wide -4° to 212° F service range
  • 5 mil polyester resists tearing at 8 lbs/in tensile
  • 10 % elongation absorbs stress on automatic splicers

Specifications

BrandThe Tape Supplies Shop

Questions about this item

What comes in the case and do I need a dispenser?

The case contains 16 rolls of 3 inch wide by 60 yard long clear double coated polyester tape. A dispenser is not included and must be purchased separately if desired.

Which roll width and length should I choose for splicing jobs?

This product is offered only in the 3 inch by 60 yard size per roll, supplied as a case of 16 rolls.

How does the 80 oz/in adhesion perform when mounting plastic keyboards?

The 80 oz per inch acrylic adhesive provides high tack that securely holds plastic keyboards in place across the rated -4 to 212 degrees Fahrenheit range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.