Decker Tape Products, Inc.
Decker Tape Products, Inc. 2" x 60 Yd 200# Yellow MOPP Strapping Tape Case of 24 Rolls
Heavy-duty yellow MOPP strapping tape with 200 lbs/in tensile strength, natural rubber adhesive, and 158°F temperature resistance, supplied in a case of 24 rolls
- 24-roll case keeps high-volume packing stations supplied
- 200 lbs/in tensile strength secures heavy loads without snapping
- 37 oz/in adhesion bonds instantly to metal and cartons
- 6 mil MOPP film resists chemicals, moisture and abrasion
- Natural rubber adhesive removes cleanly with no residue left behind
Heavy-Duty Strapping Tape Case
This case contains 24 rolls of yellow MOPP strapping tape, each measuring 2 inches wide by 60 yards long. It is built for industrial closing, holding and securing tasks such as appliance assembly, coil tabbing and L-clip or C-clip fastening. The natural rubber adhesive delivers 37 ounces per inch of adhesion and removes cleanly without residue. High resistance to chemicals and moisture makes it reliable in demanding environments.
Industrial Users Seeking Clean Removal
The tape suits manufacturers and shippers who need 200 pounds per inch tensile strength with 30 percent elongation for secure bundling. It performs in temperatures up to 158 degrees Fahrenheit and resists moisture and chemicals during transit or storage. Buyers who require a different width, length or adhesive formulation should look at alternative products. Operations needing lower tensile strength or a non-MOPP backing will not match this specification.
200 lbs/in Tensile Strength Rating
The 200 pounds per inch tensile strength is the key figure that determines whether this tape can handle your specific strapping load. Combined with 6 mil thickness and 37 oz/in adhesion, it defines the holding power for heavy coils, appliances or metal strips. If your application demands a higher or lower tensile rating, this case will not meet the requirement.
Highlights
- 24-roll case keeps high-volume packing stations supplied
- 200 lbs/in tensile strength secures heavy loads without snapping
- 37 oz/in adhesion bonds instantly to metal and cartons
- 6 mil MOPP film resists chemicals, moisture and abrasion
- Natural rubber adhesive removes cleanly with no residue left behind
Specifications
| Brand | The Tape Supplies Shop |
|---|
Questions about this item
How do I apply the 2" wide MOPP strapping tape so the 200 lbs/in tensile strength holds?
Use a strapping tape dispenser or tensioner to wrap the tape tightly around the load, overlapping each turn by at least half the width; the natural rubber adhesive needs firm pressure to reach full 37 oz/in adhesion.
Will the natural rubber adhesive on the 6 mil tape degrade or need replacement over time?
The adhesive resists chemicals and moisture and removes cleanly with no residue, so rolls stay usable until the 60-yard length is consumed; no scheduled replacement is required.
At what temperature does the 200# Yellow MOPP tape start to lose holding power during sustained use?
The tape withstands temperatures up to 158°F; beyond that the natural rubber adhesive may soften and tensile performance can decline.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Valcom, Inc VMT-2 600 Ohm Isolation Transformer personal protective equipment
Flipside Products Dry Erase Story Board 11x16 in Pack of 12
- File Folder Accesso…



