We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 36 green polyester tape rolls, 1 inch by 72 yards

Decker Tape Products, Inc.

Decker Tape Products, Inc. 1" x 72 Yd Green Polyester Powder Coating Tape (Case of 36 Rolls)

SKU CH-KBNR-ZWSAR

Green polyester tape with silicone adhesive withstands 400 °F bake cycles and removes cleanly for powder-coating masking

  • Withstands bake cycles up to 400°F with silicone adhesive
  • Clean removal after high-temperature exposure up to 392°F
  • Strong holding power from 30 oz/in adhesion rating
  • Durable 50 lbs/in tensile strength resists tearing
  • 7000-volt dielectric strength for electrical insulation

1-Inch Green Polyester Powder Coating Tape

This green polyester tape with silicone adhesive is built for powder coating, e-coating and anodizing lines. It resists acids, oils and solvents while surviving bake cycles up to 400°F. The 3.5 mil film delivers 50 lbs/in tensile strength and 30 oz/in adhesion with 100% elongation. Each case contains 36 rolls measuring 1 inch by 72 yards.

Replaces General Masking Tapes In High-Heat

Standard masking tapes fail when oven temperatures exceed their adhesive limits, leaving residue or tearing on removal. This silicone system withstands -99.4°F to 392°F and releases cleanly after full cure cycles. The upgrade is justified when rework from adhesive failure or staining costs more than the per-roll premium.

Verify Roll Width Fits Your Masking Fixtures

Confirm that 1-inch width matches the masking pattern required for your parts before ordering a 36-roll case. Check that your process temperature stays within the -99.4°F to 392°F window and that 3.5 mil thickness clears any tight geometry. Dielectric strength is rated at 7000 volts for electrical masking needs.

Highlights

  • Withstands bake cycles up to 400°F with silicone adhesive
  • Clean removal after high-temperature exposure up to 392°F
  • Strong holding power from 30 oz/in adhesion rating
  • Durable 50 lbs/in tensile strength resists tearing
  • 7000-volt dielectric strength for electrical insulation

Specifications

BrandThe Tape Supplies Shop

Questions about this item

What width and length does each roll in the 36-roll case provide?

Each roll is 1 inch wide and 72 yards long, giving 36 rolls of green polyester tape for powder-coating jobs.

How should the silicone adhesive side be applied to survive a 400°F bake cycle?

Press the adhesive firmly onto a clean, dry surface so the 30 oz/in bond holds through the full bake cycle and still releases cleanly.

When will the 3.5 mil backing need replacement during repeated high-temperature runs?

Replace a roll once the 50 lbs/in tensile strength or 100% elongation shows visible wear, typically after several 392°F exposure cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.