We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Case of 72 bright red double-coated tissue tape rolls, 1/2 inch wide

Decker Tape Products, Inc.

Decker Tape Products, Inc. 1/2" x 60 Yd Double Coated Red Tissue Tape (Case of 72 Rolls)

SKU CH-VYRB-8849Z

Case of 72 rolls of 1/2" x 60 yd double-coated red tissue tape with 6.3 mil thickness, 71 oz/in adhesion, 5.5 lbs/in tensile strength, and -40 to 302°F temperature range

  • Double-coated acrylic adhesive bonds securely to surfaces
  • 71 oz/in adhesion strength holds firm under stress
  • 5 lbs/in tensile strength resists tearing during use
  • Withstands -40° to 302° Fahrenheit temperature range
  • Case of 72 rolls supplies high-volume operations

Double-coated red tissue tape for splicing

This double-coated red tissue tape is designed for corrugated splice detection and printing-press web splicing. It uses an acrylic adhesive system and comes in a case of 72 rolls, each measuring 1/2" wide by 60 yards long. The bright red colour provides high visibility during production runs.

Suited for high-temp industrial splicing.

The tape withstands temperatures from -40 to 302 degrees Fahrenheit and delivers 71 oz/in adhesion with 5.5 lbs/in tensile strength. It suits operations that require strong, temperature-stable bonds on web-fed machinery. Buyers needing a removable or low-tack adhesive for temporary holds should look at alternative products.

Fits web-splicing stations.

At 6.3 mil thickness with 3% elongation, the tape conforms to moving webs without excessive stretch. The 60-yard roll length reduces changeover frequency on continuous production lines. Acrylic adhesive ensures consistent performance across the stated temperature range without additional surface preparation.

Highlights

  • Double-coated acrylic adhesive bonds securely to surfaces
  • 71 oz/in adhesion strength holds firm under stress
  • 5 lbs/in tensile strength resists tearing during use
  • Withstands -40° to 302° Fahrenheit temperature range
  • Case of 72 rolls supplies high-volume operations

Specifications

BrandThe Tape Supplies Shop

Questions about this item

What surface preparation or applicator is needed before using the 1/2" wide red tissue tape?

Apply the double-coated acrylic adhesive directly to clean, dry corrugated or web material; no separate primer or applicator is required for splice detection or press splicing.

Will the 6.3 mil thick tape with 71 oz/in adhesion damage delicate rollers on an older printing press?

The acrylic adhesive and 5.5 lbs/in tensile strength are designed for web splicing, so the tape releases cleanly without leaving residue that could harm vintage rollers.

How can I verify the tape performs correctly after applying it to a corrugated splice?

Check that the bright red tissue remains visible across the joint, the bond holds from -40 °F to 302 °F, and the splice shows no delamination under normal web tension.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.