We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Decker Tape Products, Inc.

Decker Tape Products, Inc. 1/2" x 18 Yd 5 mil ATG Double Coated Adhesive Transfer Tape Case of 72 Rolls

SKU CH-ZYZ1-CEJMT

Acrylic adhesive transfer tape on 18-yard rolls, 5 mil thick with 144 oz/in adhesion and a -32 to 258 °F range, reverse-wound for ATG dispensers, case of 72

  • Acrylic adhesive bonds glossy surfaces securely
  • 5 mil thickness gives strong 144 oz/in adhesion
  • Withstands -32 to 258°F for demanding environments
  • Reverse-wound design works with ATG dispensers
  • Case of 72 rolls each 18 yards long

Bulk ATG Tape for High-Volume Mounting

This case supplies 72 rolls of double-coated acrylic transfer tape, each 18 yards long and 5 mil thick. It is designed for print shops, packaging lines and display fabricators that need consistent adhesion on glossy substrates. The reverse-wound format feeds directly into ATG dispensers for continuous application.

Replacing Single Rolls and Thinner Transfer Films

Switching from individual rolls cuts change-over downtime and reduces per-yard cost for operations that run multiple dispensers daily. The 5 mil construction bridges the gap between standard 2 mil films and heavy foam tapes, so the jump is worth it when a thinner layer fails to hold textured or coated stock.

Limits of Acrylic Transfer Systems

The adhesive holds from -32 to 258 degrees Fahrenheit, but prolonged exposure beyond that range will degrade bond strength. Acrylic chemistry also requires clean, dry surfaces; oils, dust or plasticisers on the substrate will reduce the rated 144 oz/in adhesion. The tape is not intended for structural load-bearing or permanent outdoor exposure.

Highlights

  • Acrylic adhesive bonds glossy surfaces securely
  • 5 mil thickness gives strong 144 oz/in adhesion
  • Withstands -32 to 258°F for demanding environments
  • Reverse-wound design works with ATG dispensers
  • Case of 72 rolls each 18 yards long

Specifications

BrandThe Tape Supplies Shop

Questions about this item

What ATG dispenser does the 1/2-inch reverse-wound roll fit?

The tape is reverse-wound for standard ATG dispensers that accept 1/2-inch wide rolls with a 5 mil thickness.

How do you load the roll so the adhesive transfers correctly?

Insert the roll with the liner facing up, thread the liner through the take-up slot, and advance a few inches so the adhesive contacts the roller before applying.

When should a roll be replaced if it sees temperature swings from -32 °F to 258 °F?

Replace a roll when the liner tears during dispensing, adhesion drops below 144 oz/in, or the acrylic adhesive darkens or becomes brittle after repeated cycling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.