We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear polyester box sealing tape rolls in a case of four

Decker Tape Products, Inc.

Decker Tape Products 3" x 1000 Yd Clear 1.9 mil Polyester Box Sealing Tape Case of 4 Rolls

SKU CH-6A6B-Z92BZ

Clear 1.9 mil polyester tape seals boxes with 26 lbs/in tensile strength and 48 oz/in adhesion across a 45 to 120 degree Fahrenheit range

  • Strong seals from 48 oz/in rubber adhesive
  • 9 mil polyester resists tears at 26 lbs/in tensile strength
  • 165 % elongation stretches without snapping
  • 1000 yd per roll cuts roll changes
  • Works 45 °F to 120 °F in cold or hot areas

Clear Polyester Box Sealing Tape

This clear polyester tape measures three inches wide by one thousand yards per roll and comes in a case of four rolls. It uses a hot melt rubber adhesive system designed for reliable box sealing in packing and shipping operations.

Upgrade from thinner or paper-backed tapes

The 1.9 mil construction with 26 lbs/in tensile strength resists tearing better than standard polypropylene films. The jump is worth it when cartons face rough handling or when a single strip must hold heavy contents without splitting.

Sustained load performance

At 48 oz/in adhesion the bond holds firm across a 45 to 120 degree Fahrenheit range. The 165 percent elongation lets the tape stretch under stress rather than snap, keeping seals intact during long transit and temperature swings.

Highlights

  • Strong seals from 48 oz/in rubber adhesive
  • 9 mil polyester resists tears at 26 lbs/in tensile strength
  • 165 % elongation stretches without snapping
  • 1000 yd per roll cuts roll changes
  • Works 45 °F to 120 °F in cold or hot areas

Specifications

BrandThe Tape Supplies Shop

Questions about this item

What core diameter does the 3" wide tape need on a dispenser?

The roll is built on a standard 3-inch core, so any box-tape dispenser that accepts 3-inch cores and 3-inch wide rolls will fit it.

How should the hot-melt rubber adhesive be applied for a reliable seal?

Apply firm, even pressure along the full length after placing the tape; the 48 oz/in adhesion and 26 lbs/in tensile strength develop best when the adhesive wets the corrugate completely.

When should a roll be replaced if the warehouse cycles between 45°F and 120°F?

Replace the roll if the adhesive loses tack or the 1.9 mil polyester film shows cracking after repeated exposure across the 45–120 °F range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.