DBTLAP
DBTLAP power adapter for Acer TravelMate B117-M B117-MP 19V 2.37A 3.0*1.1mm
Replacement 19 V 2.37 A charger with 3.0 × 1.1 mm tip for Acer TravelMate B117‑M and B117‑MP laptops
- TypeAC Adapter
- Delivers 19 V 2.37 A for stable TravelMate B117-M operation
- 0 mm × 1.1 mm barrel matches original charger exactly
- 100 % compatibility verified for TravelMate B117-M and B117-MP
- Each unit tested before dispatch for reliable performance
- Includes adapter and power cord for immediate use
Compatible Acer TravelMate adapter
This 19 V 2.37 A power adapter replaces the original charger for Acer TravelMate B117-M and B117-MP laptops. It delivers the exact voltage and current those models require. A 3.0 mm by 1.1 mm barrel connector fits the DC jack without adapters. The package includes the adapter and a mains power cord.
Suits owners of listed models only
Buyers with an Acer TravelMate B117-M or B117-MP receive a direct-fit replacement. Users of any other Acer series or different barrel sizes should look elsewhere because the connector and output will not match. Laptops needing a higher or lower current rating cannot use this unit safely.
Output specification decides fit
The single figure that confirms compatibility is the 19 V 2.37 A output combined with the 3.0 mm by 1.1 mm tip. Match both numbers to the label on your original charger before ordering.
Highlights
- Delivers 19 V 2.37 A for stable TravelMate B117-M operation
- 0 mm × 1.1 mm barrel matches original charger exactly
- 100 % compatibility verified for TravelMate B117-M and B117-MP
- Each unit tested before dispatch for reliable performance
- Includes adapter and power cord for immediate use
Specifications
| Type | AC Adapter |
|---|
Questions about this item
How do I connect the 3.0*1.1mm tip to my TravelMate B117-M, and what step is often missed?
Align the 3.0 mm outer and 1.1 mm inner dimensions with the laptop's DC jack, push straight in until it seats firmly, then plug the AC cord into the adapter before the wall outlet — skipping the cord-to-adapter step leaves the unit unpowered.
Which part of this 19V 2.37A adapter will need replacement first?
The detachable AC power cord typically wears at the strain relief before the adapter body; keep the cord uncoiled during use and replace it if the insulation cracks.
What limit appears first when this charger runs continuously at full load?
The 19 V 2.37 A output rating is the thermal ceiling; sustained maximum draw will raise the case temperature until the internal protection reduces power or shuts the unit down.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



