We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Replacement cooling fan for Dell Latitude E6430, 4-pin connector

DBTLAP

DBTLAP laptop cooling pad for Dell Latitude E6430 4 pin

SKU CH-6R7X-GZ4HR

Replacement cooling fan with four-pin connector for Dell Latitude E6430 integrated-graphics models

  • Accessory TypeCooler
  • Compatible replacement for Dell Latitude E6430
  • 4-pin connector matches original DP/N 00XDK0
  • Each unit tested before dispatch for 100% function
  • 9-month warranty included with purchase
  • Produced by Forcecon, ADDA, Sunon or Kipo

Replacement Fan for Latitude E6430

This four-pin cooling fan is built for the Dell Latitude E6430 with integrated graphics. It serves as a direct swap for the original DP/N 00XDK0 unit. Each piece is tested before dispatch to confirm 100 % operation.

Upgrade from a Failed or Noisy Stock Fan

The part replaces a worn, loud or non-spinning factory cooler that can cause thermal throttling or shutdowns. The jump is worth it when the laptop runs hot, the fan rattles or the system reports a fan error at boot.

Suits Owners of the E6430 Integrated-Graphics Model

Buyers who need a drop-in cooler for this exact chassis and graphics configuration will find it compatible. Those with discrete-graphics variants, other Latitude generations or different manufacturers should look elsewhere.

Highlights

  • Compatible replacement for Dell Latitude E6430
  • 4-pin connector matches original DP/N 00XDK0
  • Each unit tested before dispatch for 100% function
  • 9-month warranty included with purchase
  • Produced by Forcecon, ADDA, Sunon or Kipo

Specifications

Accessory TypeCooler

Questions about this item

Does the 4-pin connector match the Dell Latitude E6430 integrated-graphics fan header?

Yes, the fan uses a 4-pin DP/N 00XDK0 CN-00XDK0 connector that plugs directly into the Latitude E6430 integrated-graphics motherboard header.

Which screw holes must line up when fitting this fan into the E6430 chassis?

Align the fan’s mounting tabs with the two screw holes on the E6430 heatsink bracket; the tabs only fit one orientation, so rotate the fan until both holes match before tightening.

How often should the fan bearing be cleaned to keep airflow steady?

Blow compressed air through the vents every six months; the sealed bearing cannot be lubricated, so replace the fan if noise or vibration appears after cleaning.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.