DBTLAP
DBTLAP laptop cooling pad for DELL Latitude 7320 2-in-1
Replacement CPU cooling fan for Dell Latitude 7320 2-in-1, 5 V 0.5 A, tested before shipping
- Accessory TypeCooler
- Replaces worn fan to restore cooling performance
- Matches part numbers 0XCNHG XCNHG AT30R002DTL ND75C60-20E01 for exact fit
- Operates at 5V 0.5A for efficient power use
- Tested before shipping to ensure reliable operation
- Includes one fan ready for installation
Direct replacement cooler
This heatsink fan is built as a drop-in replacement for the DELL Latitude 7320 2-in-1 series, matching part numbers 0XCNHG, XCNHG, AT30R002DTL and ND75C60-20E01. It serves owners whose original cooler has failed or become noisy and who need the exact OEM fit without modification.
5 V 0.5 A power envelope
The unit runs from the laptop's 5 V rail at 0.5 A, drawing minimal power while moving air across the CPU heatpipe. It handles everyday office loads and moderate multitasking, but sustained heavy compute will eventually exceed its thermal capacity and the system will throttle.
Tested low-noise operation
Each cooler is tested before shipping to verify smooth rotation and quiet bearing performance at the rated voltage. In normal use the fan stays audible but unobtrusive, and the low current draw avoids adding measurable heat to the chassis. Builders needing higher airflow for overclocking should look elsewhere.
Highlights
- Replaces worn fan to restore cooling performance
- Matches part numbers 0XCNHG XCNHG AT30R002DTL ND75C60-20E01 for exact fit
- Operates at 5V 0.5A for efficient power use
- Tested before shipping to ensure reliable operation
- Includes one fan ready for installation
Specifications
| Accessory Type | Cooler |
|---|
Questions about this item
Will the 5 V 0.5 A fan work with the original motherboard header on my Latitude 7320 2-in-1?
The replacement fan is rated 5 V 0.5 A, matching the original specification, so it connects directly to the existing motherboard header without adapters.
How can I confirm the new heatsink fan is spinning correctly after I install it?
After reassembly, power on the laptop and listen for the fan; the system should report normal CPU temperatures under load and the fan speed should appear in BIOS or Dell diagnostics.
Does the package include mounting screws or thermal paste, or must I buy them separately?
The box contains only the fan unit; mounting screws and thermal compound are not included and must be sourced separately if the originals cannot be reused.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



