We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DBTLAP

DBTLAP laptop cooling pad Dell Optiplex GX620 SAN ACE 60

SKU CH-HEAP-4SDPM

A replacement case fan tested for the Dell Optiplex GX620 and SAN ACE 60 models

  • Accessory TypeCooler
  • Direct replacement for Dell Optiplex GX620
  • SAN ACE 60 part numbers 9G0612P1M031 41 51
  • Individually tested for 100 percent operation
  • Nine month seller warranty included
  • Wholesale pricing available for bulk orders

Dell Optiplex GX620 Replacement Fan

This 60 mm case fan is built as a direct drop-in for the Dell Optiplex GX620 desktop. It matches part numbers 9G0612P1M051, 9G0612P1M041, 9G0612P1M031 and PN U8679 so system builders can restore original cooling without adapter cables.

Thermals Noise and Power

The SAN ACE 60 unit spins at 12 V and draws low current, keeping acoustic output modest while moving enough air for the GX620 chassis. Each unit is tested individually before dispatch to confirm 100 % operational status.

Build and Connectors

The three-wire lead plugs straight into the motherboard header, enabling speed monitoring and PWM control where supported. Forcecon, ADDA, Sunon or Kipo may supply the actual rotor depending on stock, but every variant meets the same fit and electrical spec.

Highlights

  • Direct replacement for Dell Optiplex GX620
  • SAN ACE 60 part numbers 9G0612P1M031 41 51
  • Individually tested for 100 percent operation
  • Nine month seller warranty included
  • Wholesale pricing available for bulk orders

Specifications

Accessory TypeCooler

Questions about this item

How do I install the fan in my Dell Optiplex GX620 case?

Remove the old fan, match the 4-pin connector orientation, secure the new fan with the original screws, and verify it spins at boot.

What maintenance will this replacement fan need later?

Clean dust from the blades and heatsink every few months with compressed air; the sealed bearing requires no lubrication.

What limit appears first when the fan runs continuously under load?

The motor is rated for 100 percent duty cycle, so the first limit is dust buildup reducing airflow over time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.