We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
DBTLAP laptop cooling heatsink with fan for EG7515S1-C020-S9A K89014

DBTLAP

DBTLAP CPU Graphics Cooling Heatsink EG7515S1-C020-S9A K89014

SKU CH-MG9D-PYGTE

A replacement heatsink with fan for laptop CPU and graphics cooling, tested before shipping

  • Accessory TypeCooler
  • Cools CPU and graphics with dedicated heatsink
  • Includes one fan for active airflow
  • Tested before shipping for reliable operation
  • Designed for EG7515S1-C020-S9A K89014
  • Verify photos and part number for exact fit

Targeted Laptop Heatsink

This cooling heatsink is engineered for the specific EG7515S1-C020-S9A K89014 laptop model. It replaces the original CPU and graphics thermal module to restore factory cooling performance. Buyers must verify the part number against their existing hardware before ordering. It is not a universal accessory and will not fit other laptop designs.

Thermals and Power

The unit includes a single fan that draws power directly from the laptop motherboard header. No external power adapter or separate controller is required. Each heatsink assembly is tested by the supplier before shipment to confirm operational integrity. Normal operating noise and thermal output match the original equipment specifications for this chassis.

Compatibility Constraint

Correct fitment depends entirely on matching the EG7515S1-C020-S9A K89014 part number printed on the original heatsink. Photographs supplied by the supplier should be compared carefully with the component being replaced. Builders who need a different mounting layout or connector pinout cannot use this module.

Highlights

  • Cools CPU and graphics with dedicated heatsink
  • Includes one fan for active airflow
  • Tested before shipping for reliable operation
  • Designed for EG7515S1-C020-S9A K89014
  • Verify photos and part number for exact fit

Specifications

Accessory TypeCooler

Questions about this item

How do I install the EG7515S1-C020-S9A heatsink without damaging the CPU or graphics die?

Remove the old cooler, clean both dies with isopropyl alcohol, apply a thin layer of thermal paste, align the heatsink exactly over the CPU and GPU, then tighten the mounting screws in a cross pattern to avoid uneven pressure.

What maintenance will the included fan need after extended use?

Blow dust from the fan blades and heatsink fins with compressed air every few months; if the fan becomes noisy or stops spinning, replace it with a matching 1x fan unit.

At what point does the heatsink hit its thermal limit during a long gaming session?

The aluminium block saturates once the CPU and GPU push sustained loads beyond what the single fan can exhaust, causing temperatures to climb until the system throttles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.