DBTLAP
DBTLAP CPU Fan for Toshiba Mini NB100 laptop cooling pad
Replacement CPU cooling fan for Toshiba Mini NB100 laptops, 5 V 0.15 A, tested before shipping
- Accessory TypeCooler
- Cools your Toshiba Mini NB100 efficiently
- Runs on 5 V and 0.15 A power draw
- Tested individually for 100% working order
- Replaces part numbers UDQFYFR08C1N and 6033B0017701
- Includes one ready-to-install cooling fan
Replacement CPU Fan for Toshiba Mini NB100
This replacement CPU fan is built for the Toshiba Mini NB100 laptop. It matches the UDQFYFR08C1N and 6033B0017701 part numbers. Each unit is tested before shipping to confirm 100% operation. Installers should verify the original fan against the photos to ensure the correct fit.
Sustained Cooling Behaviour
The fan runs at 5 V and draws 0.15 A to move air across the heatsink during extended workloads. Continuous spinning keeps component temperatures steadier than short bursts of maximum speed. The 9-month warranty period reflects the supplier's confidence in long-term reliability. Actual airflow will vary with the laptop's internal ducting.
Thermals Noise and Power Draw
At the rated 5 V and 0.15 A the fan consumes very little power from the laptop's supply. Noise output depends on the specific manufacturer — Forcecon, ADDA, Sunon, Kipo or an equivalent — supplied from current stock. No additional power adapter is required because the fan connects directly to the motherboard header.
Highlights
- Cools your Toshiba Mini NB100 efficiently
- Runs on 5 V and 0.15 A power draw
- Tested individually for 100% working order
- Replaces part numbers UDQFYFR08C1N and 6033B0017701
- Includes one ready-to-install cooling fan
Specifications
| Accessory Type | Cooler |
|---|
Questions about this item
How much power does the 5V 0.15A fan draw during all-day operation?
The fan runs at 5 volts and 0.15 amps, so its continuous draw is very low and will not strain the laptop's USB port or internal header.
Which connector must my Toshiba Mini NB100 already have for this UDQFYFR08C1N fan to plug in?
It replaces the original UDQFYFR08C1N, 6033B0017701 or V000150320 fan, so the motherboard must provide the matching 5 V header used by those part numbers.
Will this replacement fan fit if my NB100 still uses the original Forcecon, ADDA, Sunon or Kipo cooler?
Yes — the unit is built to the same mounting holes and voltage as the factory Forcecon, ADDA, Sunon and Kipo fans used in the NB100.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



