We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
DBTLAP replacement CPU cooling fan for MSI GT62 laptop, 4-pin 12V connector

DBTLAP

DBTLAP CPU Cooling Fan MSI GT62 4-Pin 12V 0.65A

SKU CH-ATKR-Y6H2P

A replacement 12 V 0.65 A four-pin CPU cooling fan for compatible MSI GT62 series laptops, tested before shipping

  • Accessory TypeCooler
  • Replaces faulty CPU fan in compatible MSI GT62 models
  • 4-pin 12 V 0.65 A connector matches original specification
  • Each unit tested before shipping for reliable operation
  • Verify photos and part number to ensure exact fit
  • Direct replacement for MS-16L1 MS-16L2 MS-16L3 6RD 6RE 7RE N322 PABD19735BM

Replacement CPU Cooling Fan for MSI GT62 Series

This new DBTLAP cooling fan is built as a direct replacement for the CPU cooler in MSI GT62, GT62VR and related MS-16L1, MS-16L2, MS-16L3, 6RD, 6RE, 7RE and N322 laptops. It suits repair technicians or owners performing their own maintenance who need to match the original part number PABD19735BM exactly. Each unit is tested before shipping to confirm basic operation.

Four-Pin 12 V 0.65 A Power and Thermal Profile

The fan connects via a standard four-pin header and draws 0.65 A at 12 V, matching the motherboard's original power budget and PWM control scheme. This electrical parity means the replacement will spin at the same speed curves and acoustic levels as the factory unit under identical thermal loads. No adapter or wiring modification is required for installation.

Compatibility Decided by Part Number and Connector

The single specification that determines fit is the part number PABD19735BM combined with the four-pin 12 V interface; buyers must verify this code against the sticker on their existing fan before ordering. Laptops outside the listed MSI model families, or units with a different connector pinout or voltage rating, will not accept this cooler. Visual comparison with the product photos is essential to avoid mismatches.

Highlights

  • Replaces faulty CPU fan in compatible MSI GT62 models
  • 4-pin 12 V 0.65 A connector matches original specification
  • Each unit tested before shipping for reliable operation
  • Verify photos and part number to ensure exact fit
  • Direct replacement for MS-16L1 MS-16L2 MS-16L3 6RD 6RE 7RE N322 PABD19735BM

Specifications

Accessory TypeCooler

Questions about this item

How do I install the 4-pin 12V 0.65A fan in my MSI GT62 and what step is often missed?

Disconnect the battery, remove the bottom cover, unplug the old fan connector, swap the fan, then reconnect the 4-pin cable firmly — the step most people miss is reseating the connector fully so the tachometer signal works.

What maintenance will this replacement fan need later?

Blow dust from the heatsink fins and fan blades every few months with compressed air; the sleeve bearing is not user-lubricable, so plan to replace the fan again when noise or rpm drop appears.

What limit appears first during sustained loads on this 12V 0.65A cooler?

The 0.65 A current ceiling caps maximum rpm, so under long heavy loads the fan hits its speed limit before thermal throttling eases, making regular dust cleaning critical.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.