We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
DBTLAP CPU cooling fan for HP ProBook 630 G8 430 G8 5v 0.5a

DBTLAP

DBTLAP CPU Cooling Fan for HP ProBook 630 G8 430 G8 5v 0.5a

SKU CH-TD7Z-N32M7

Replacement CPU cooling fan for HP ProBook 630 G8 and 430 G8, tested before shipping

  • Accessory TypeCooler
  • Keeps HP ProBook 630 G8 running cool with direct replacement fan
  • Matches HP ProBook 430 G8 exactly using part number PB7505S05HS2
  • Delivers reliable airflow at 5 V 0.5 A for stable operation
  • Tested before shipping so it works straight from the box
  • Verified compatibility avoids wrong-part hassle with model-number check

Replacement Fan for HP ProBook Models

This new DBTLAP cooling fan is built for HP ProBook 630 G8 and 430 G8 laptops. It matches part number PB7505S05HS2 and M27413-001. The unit runs on 5V and draws 0.5A. Each fan is tested before shipping to confirm operation. Buyers who need a different voltage or connector cannot use this part.

Thermals and Power in Daily Use

The fan operates at the specified 5V 0.5A rating to move air through the heatsink during normal workloads. Power draw stays within the laptop's original design envelope. No additional power circuitry is required. Installers who cannot verify the exact part number against photos should not proceed.

Behaviour Under Sustained Load

Under continuous load the fan maintains its rated voltage and current to sustain airflow. The tested unit is a direct mechanical replacement for the original cooler. Compatibility is limited to the listed ProBook models. Systems needing a different form factor or higher airflow rating will not be served by this component.

Highlights

  • Keeps HP ProBook 630 G8 running cool with direct replacement fan
  • Matches HP ProBook 430 G8 exactly using part number PB7505S05HS2
  • Delivers reliable airflow at 5 V 0.5 A for stable operation
  • Tested before shipping so it works straight from the box
  • Verified compatibility avoids wrong-part hassle with model-number check

Specifications

Accessory TypeCooler

Questions about this item

How do I install the DBTLAP CPU cooling fan in my HP ProBook 630 G8 and what step is often missed?

Remove the bottom case, disconnect the old fan cable from the motherboard, swap the fan, reconnect the cable firmly, then reassemble; the step often missed is fully seating the connector so the 5v 0.5a power and tachometer signal make contact.

What maintenance or replacement will this 5v 0.5a cooling fan need over time?

Dust builds up on the blades and heatsink fins, so clean it with compressed air every few months; if bearing noise appears or airflow drops, replace the fan with another unit matching part numbers PB7505S05HS2 or M27413-001.

What limit appears first when this fan runs continuously under heavy load?

The 5v 0.5a power ceiling caps maximum speed, so sustained 100 % duty cycle hits the current limit before thermal headroom runs out, causing the fan to hold its top RPM rather than spin faster.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.