DBTLAP
DBTLAP CPU Cooling Fan FB07007M05LPA-001 FB07007M05SFA 5V 0.45A 4Pin 4Wire
Replacement 5 V 0.45 A four-pin CPU cooling fan for Cooler Master laptops
- Accessory TypeCooler
- Direct replacement for Cooler Master FB07007M05LPA-001
- 5 V 0.45 A 4-pin PWM control for precise speed regulation
- Each unit tested before shipping for reliable operation
- Verify compatibility using your exact part number
- Single fan included, ready to install
Replacement Fan for Cooler Master
This new DBTLAP cooling fan replaces the original Cooler Master FB07007M05LPA-001 and FB07007M05SFA units. It is intended for laptop owners or repair technicians who need a direct swap for a worn or failed cooler. The 4-pin 4-wire connector matches the factory interface. Verify the part number against your device before ordering.
5 V 0.45 A Power Characteristics
The fan operates at 5 volts and draws 0.45 amperes, matching the specification of the original component. This power profile supports standard laptop thermal management without exceeding the system's designed current budget. Each unit is tested before shipping to confirm correct electrical function. Buyers who need a different voltage or connector layout cannot use this part.
Sustained Cooling Behaviour
Under continuous load the fan maintains the airflow profile defined by the OEM design for the supported Cooler Master models. The 4-wire PWM control allows the laptop firmware to modulate speed as temperatures rise and fall. Users seeking higher static pressure or lower acoustic output than the original specification should consider alternative cooling solutions.
Highlights
- Direct replacement for Cooler Master FB07007M05LPA-001
- 5 V 0.45 A 4-pin PWM control for precise speed regulation
- Each unit tested before shipping for reliable operation
- Verify compatibility using your exact part number
- Single fan included, ready to install
Specifications
| Accessory Type | Cooler |
|---|
Questions about this item
How do I install the 4-pin connector without bending the pins?
Align the keyed 4-pin plug with the motherboard header, press straight down until it clicks, and avoid angling the plug which bends the delicate pins.
What part will need replacement after extended use?
The fan motor and bearings are the only moving parts; they wear over time and the whole fan unit is replaced as a single component.
At what power draw does the fan hit its thermal limit?
The fan is rated at 5 V and 0.45 A; sustained operation at that draw is its design limit before temperature protection engages.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



