We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 100mm black GPU cooling fan with a four-pin connector

DBTLAP

DBTLAP 100mm GPU Fan GAA8S2U DC12V 0.45A PFTA 4PIN

SKU CH-N5J5-GWKSJ

A 100 mm GPU cooling fan rated at 12 V DC and 0.45 A with a 4-pin PFTA connector

  • Accessory TypeCooler
  • 100 mm fan fits compatible GPU coolers
  • 12 V DC input powers the motor reliably
  • 45 A draw keeps energy use low
  • Four-pin PFTA connector enables PWM speed control
  • Tested before shipping so it works on arrival

100mm GPU Replacement Fan

This 100mm cooling fan is built for laptops that use the GAA8S2U model. It suits owners who need a direct swap for a worn or noisy original unit. Buyers who want a universal cooler or a larger frame will not find a match here.

DC12V 0.45A Four-Pin Power

The fan runs on twelve volts and draws zero point four five amps through a four-pin connector. That supply handles normal GPU thermal loads in the target chassis. Systems that require a different voltage, a higher current draw or a three-pin header cannot use this part.

Single Fan In Package

Only the fan itself is included in the box. No mounting screws, cables or thermal pads are supplied, so installers must reuse existing hardware. Anyone expecting a complete kit with extra accessories will need to source those separately.

Highlights

  • 100 mm fan fits compatible GPU coolers
  • 12 V DC input powers the motor reliably
  • 45 A draw keeps energy use low
  • Four-pin PFTA connector enables PWM speed control
  • Tested before shipping so it works on arrival

Specifications

Accessory TypeCooler

Questions about this item

Will the 100mm fan connect to my existing 4-pin GPU header?

The fan uses a 4-pin PFTA connector rated for 12 V and .45 A; match that pin-out to your board header before fitting.

How can I verify the fan is running correctly once installed?

Each unit is tested before shipping; after fitting, confirm the blades spin smoothly and the GPU temperature drops under load.

What comes in the package and what else do I need?

The box contains one 100mm GPU fan only; you must supply any mounting screws, thermal pads or cables required for your specific card.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.