We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DBI/SALA

DBI/SALA 1500017 Tool Cinch 5-45/64" W 25-3/4" L personal protective equipment

SKU CH-816J-HFZ6B

A yellow nylon tool tether with a D-ring and cinch loop, rated to 80 lb and compliant with ANSI/ISEA 121-2018

  • MaterialHAWA
  • Secure tools with 80 lb rated cinch strap
  • ANSI/ISEA 121-2018 compliant tethering system
  • Durable nylon webbing construction for longevity
  • D-ring and cinch loop attachment versatility
  • High-visibility yellow enhances workplace safety

DBI/SALA 1500017 Tool Cinch

The DBI/SALA 1500017 Tool Cinch is a tethering device designed for hand tools. It features a D-ring attachment end and a cinch loop tool end made from nylon webbing. The unit meets ANSI/ISEA 121-2018 standards for dropped object prevention. Workers at height use it to secure tools up to the rated capacity.

Replaces makeshift lanyards or tape

This cinch strap replaces improvised tethering methods that lack a certified weight rating. The jump is worth it when a job site requires documented compliance with the ANSI/ISEA 121-2018 standard. Its single D-ring and cinch loop provide a dedicated attachment point for a tool. The 25 3/4 inch length offers a fixed reach for the connection.

80 lb weight capacity headroom

The tether comfortably handles hand tools weighing up to 80 lb within the certified limit. It runs out when the tool mass exceeds that rated capacity or when a double-ended connection is required. The 5 3/4 inch width and yellow nylon webbing provide high visibility during use. The pack quantity of one covers a single tool attachment point.

Highlights

  • Secure tools with 80 lb rated cinch strap
  • ANSI/ISEA 121-2018 compliant tethering system
  • Durable nylon webbing construction for longevity
  • D-ring and cinch loop attachment versatility
  • High-visibility yellow enhances workplace safety

Specifications

BrandDBI-SALA
MaterialHAWA

Questions about this item

What width and length does the 1500017 Tool Cinch measure?

The cinch strap is 5 45/64 inches wide and 25 3/4 inches long, giving a single D-ring attachment point for hand tools.

How do you attach the cinch loop to a hand tool, and what step is often missed?

Pass the yellow nylon webbing loop through the tool handle, then pull the D-ring end through that loop and tighten; the step often missed is seating the D-ring fully against the tool so the cinch cannot slip.

When should the 80 lb rated webbing be replaced?

Replace the tether if the yellow nylon webbing shows cuts, abrasion, UV fading, or if the D-ring is bent or corroded, because any damage reduces the 80 lb capacity certified to ANSI/ISEA 121-2018.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.