We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Medium blue full-body safety harness with quick-connect buckles

DBI/SALA

DBI/SALA 1110843 Full Body Harness Medium 420 lb personal protective equipment

SKU CH-QQEV-5N04J MPN 1110843

Medium full-body harness rated to 420 lb with quick-connect buckles meeting ANSI Z359.11-2014 and OSHA fall-protection standards

  • MaterialNylon
  • Medium full-body harness supports 420 lb capacity
  • Quick-connect chest and leg buckles speed up donning
  • Meets OSHA 1910.140 and 1926.502 fall-protection standards
  • Certified to ANSI Z359.11-2014 for personal fall arrest
  • PVC-coated forged alloy steel hardware resists corrosion

DBI/SALA ExoFit XP Medium Harness

The DBI/SALA 1110843 is a full-body fall-protection harness sized Medium with a 420 lb weight capacity. It meets OSHA 1910.140, OSHA 1926.502 and ANSI Z359.11-2014 for construction and general-industry work at height. PVC-coated forged alloy steel hardware and nylon webbing resist abrasion and corrosion on demanding job sites.

Quick-connect chest and leg buckles

Quick-connect buckles on the chest and leg straps let a worker don the harness in seconds without threading loose webbing. The most common error is leaving a buckle partially engaged, which can release under load; always pull each strap to confirm a positive click before climbing. Proper Medium fit is essential — loose webbing creates slack that increases fall distance and injury risk.

Standards-defined capacity and inspection

The 420 lb capacity includes the worker, tools and clothing combined; exceeding it voids compliance with the listed standards. Nylon webbing degrades from UV exposure, chemicals and sharp edges, so a competent-person inspection is required before every use and at least annually. Any cut, burn or stitching damage means the harness must be removed from service immediately.

Highlights

  • Medium full-body harness supports 420 lb capacity
  • Quick-connect chest and leg buckles speed up donning
  • Meets OSHA 1910.140 and 1926.502 fall-protection standards
  • Certified to ANSI Z359.11-2014 for personal fall arrest
  • PVC-coated forged alloy steel hardware resists corrosion

Specifications

BrandDbi-Sala
Model1110843
MaterialNylon

Questions about this item

How can I verify the harness is working as intended after I put it on?

After donning the harness, check that all quick-connect buckles on the chest and leg straps are fully engaged and locked, confirm the webbing lies flat without twists, and ensure the dorsal D-ring sits centred between the shoulder blades; a proper fit allows full range of motion while keeping the harness snug against the body.

What comes in the box and what must I purchase separately?

The package contains the ExoFit XP full-body harness (model 1110843) with PVC-coated forged alloy steel hardware and nylon webbing; you will need to buy a compatible lanyard or self-retracting lifeline and any required anchorage connectors separately.

Which version should I choose for a worker who weighs up to 420 lb?

This medium-size ExoFit XP harness is rated for a 420 lb capacity and meets OSHA 1910.140, OSHA 1926.502 and ANSI Z359.11-2014, so select it when the user’s weight including tools does not exceed that limit and a medium fit is appropriate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.