Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00933729BTC
In stock
Dayton
Dayton Steel Rod Lever Arm 10 in
A 10-inch steel rod lever actuator compatible with multiple Dayton light-switch models including 11X439, 11X440, 11X444, 11X446, 11X451, 11X454, 11X486, 12T835, 12T836, 12T837, 12T886, 12T887.
- TypeLight Switch
- 10 in steel rod arm reaches distant switch positions
- Compatible with 11X439, 11X440, 11X444 and other listed models
- Rod actuator type provides direct mechanical operation
- Steel construction resists wear in industrial environments
- 19 in arm width fits standard mounting brackets
Steel Rod Lever Arm 10 in
The Dayton steel rod lever arm extends 10 inches and mounts to compatible light switches. Its steel construction provides durability for industrial and commercial control panels. The arm width measures 1.19 inches and the depth is 0.75 inches. This new actuator replaces worn or missing original equipment.
Compatible switch models listed only
Installers working with the specific Dayton switch series numbered 11X439 through 12T897 will find the correct fit here. The actuator type is a plain rod without a roller, so applications requiring a roller cam should look elsewhere. No other switch families or brands are supported by this part number.
Arm length 10 in decides fit
The 10 inch rod length is the critical dimension that determines whether this lever clears the enclosure and reaches the operator. Verify the required throw distance against this fixed length before ordering. All other specifications follow from the listed compatible switch models.
Highlights
- 10 in steel rod arm reaches distant switch positions
- Compatible with 11X439, 11X440, 11X444 and other listed models
- Rod actuator type provides direct mechanical operation
- Steel construction resists wear in industrial environments
- 19 in arm width fits standard mounting brackets
Specifications
| Brand | Dayton |
|---|---|
| Type | Light Switch |
Questions about this item
What switch models does the 10 in steel rod lever arm fit?
This lever arm is designed for use with Dayton models 11X439, 11X440, 11X444, 11X446, 11X451, 11X454, 11X486, 12T835, 12T836, 12T837, 12T886, 12T887, 12T888, 12T889, 12T895, 12T896, and 12T897.
How do I install the rod lever actuator on the switch?
Mount the actuator onto the compatible switch body, ensuring the 1.19 in arm width and 0.75 in arm depth align with the switch mechanism; the common error is forcing the steel rod without verifying the actuator type matches the switch.
When should I replace the steel rod lever arm?
Replace the arm if the steel rod shows bending, corrosion, or wear at the pivot point that prevents smooth actuation of the connected light switch.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
