We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 20 inch steel belt drive ceiling fan frame, six blades, no motor or guard visible

Dayton

Dayton Standard Duty Belt Drive Ceiling Fan 20 in

SKU CH-F6EN-XBJDW

Moves up to 4,587 cfm through a 20 in steel propeller with six blades at speeds between 953 and 1,221 rpm

  • typeStandard Duty Belt Drive Less Drive Package
  • Moves up to 4,587 cfm for strong ventilation
  • Steel blades and frame resist wear in tough settings
  • Belt drive handles 1/4 to 1/2 hp motors
  • Fits 22 1/2 in square cut-out for easy install
  • Runs 953 to 1,221 rpm for flexible airflow control

Dayton 20 in Belt-Drive Ceiling Fan

This Dayton standard-duty belt-drive ceiling fan has a 20 in steel blade diameter and a six-blade steel construction. It is built for installations that supply their own motor and drive components. The stamped steel frame fits a 22 1/2 in cut-out.

Airflow and speed limits

The fan delivers between 3,581 cfm and 4,587 cfm at a maximum static pressure of 0.75 in wg. Motor speed must stay between 953 RPM and 1,221 RPM. Motor horsepower must remain between 1/4 hp and 1/2 hp for safe operation.

Replaces direct-drive or smaller belt units

This unit replaces direct-drive fans that cannot meet the required static pressure or airflow range. The jump is worth it when the duct system demands the 0.75 in wg capability and the installer can provide a compatible motor within the 1/4 hp to 1/2 hp window.

Highlights

  • Moves up to 4,587 cfm for strong ventilation
  • Steel blades and frame resist wear in tough settings
  • Belt drive handles 1/4 to 1/2 hp motors
  • Fits 22 1/2 in square cut-out for easy install
  • Runs 953 to 1,221 rpm for flexible airflow control

Specifications

BrandDayton
typeStandard Duty Belt Drive Less Drive Package

Questions about this item

Which motor horsepower range works with this 20 in belt-drive fan?

The fan accepts motors from 1/4 hp up to 1/2 hp, so choose a motor within that range to match the required airflow and speed.

What airflow and speed will I get once the fan is installed?

At 1/4 hp and 953 RPM the fan moves 3,581 cfm; at 1/2 hp and 1,221 RPM it delivers 4,587 cfm with up to 0.75 in wg static pressure.

What drive interface does this unit use and what does it limit?

It uses a belt-drive system without a drive package; the belt and pulley selection determines the final speed between 953 and 1,221 RPM and the airflow between 3,581 and 4,587 cfm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.