We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular industrial limit switch with side rotary actuator, grey enclosure, surface mount holes visible

Dayton

Dayton SPDT Rotary Limit Switch 10A 600V

SKU CH-G19F-A2Y56

SPDT rotary limit switch rated 10A at 600V with NEMA 13, 3, 4, 4X, 6P enclosure and side-mounted rotary actuator

  • TypeLight Switch
  • Rated for 10 A at 600 V AC and DC
  • SPDT contact form handles two circuit paths
  • NEMA 13, 3, 4, 4X, 6P enclosure resists dust and water
  • Miniature body measures 2.46 in high, 1.65 in wide, 1.74 in deep
  • Rotary actuator operates in both clockwise and counter-clockwise directions

SPDT Rotary Limit Switch 10A 600V

The Dayton SPDT rotary limit switch provides a single-pole double-throw contact rated at 10A for both AC and DC circuits up to 600V. It uses a side-mounted rotary actuator in a miniature, surface-mount body measuring 2.46 in high, 1.65 in wide and 1.74 in deep. The switch carries NEMA 13, 3, 4, 4X and 6P ratings for dust and water ingress protection.

Industrial control panels and machinery guarding

This switch suits control panels, conveyor systems and safety circuits that require a compact rotary actuator with high environmental sealing. It is not for applications needing a lever actuator, boot-sealed shaft or a different contact form such as DPDT. Buyers who want a lever-operated limit switch should look at a different model.

10A 600V contact capacity and NEMA 6P sealing

The contacts handle 10A at 600V AC or DC, giving headroom for standard industrial control voltages and small motor loads. The NEMA 6P rating means the enclosure withstands prolonged submersion and hose-down cleaning. The switch runs out of capacity for circuits above 600V or currents exceeding 10A, and it lacks a lever actuator for alternative mounting styles.

Highlights

  • Rated for 10 A at 600 V AC and DC
  • SPDT contact form handles two circuit paths
  • NEMA 13, 3, 4, 4X, 6P enclosure resists dust and water
  • Miniature body measures 2.46 in high, 1.65 in wide, 1.74 in deep
  • Rotary actuator operates in both clockwise and counter-clockwise directions

Specifications

BrandDayton
TypeLight Switch

Questions about this item

What voltage circuit do I need to connect this 10A 600V SPDT rotary limit switch to?

The switch is rated for 10A at 600V AC or DC, so it works on circuits up to 600 volts.

Will this NEMA 13, 3, 4, 4X, 6P rated switch fit in the same panel cut-out as my older miniature limit switch?

The body measures 2.46 in high, 1.65 in wide and 1.74 in deep; compare those dimensions with your existing cut-out.

How can I verify the SPDT contacts are switching correctly after I wire the rotary head?

Operate the rotary actuator through its full travel and use a multimeter to confirm continuity changes between the common, normally open and normally closed terminals.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.