We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Dayton

Dayton Rectangular Fire Damper 5-3/4x9-3/4 In

SKU CH-DPSB-4NZNR

Rectangular fire damper for low-pressure HVAC systems with 1-1/2 hour fire rating and 165°F fusible link

  • TypeDynamic With Fire Resistance Rating Less Than 3 Ho
  • 1-1/2 hour fire rating protects duct penetrations
  • UL 555 and NFPA 80/90A/101 compliance for code acceptance
  • 165 °F fusible link triggers automatic closure
  • 22 ga galvanised steel resists corrosion in HVAC systems
  • .219 sq ft free area maintains airflow efficiency

Rectangular Fire Damper 5-3/4x9-3/4 In

The Dayton rectangular fire damper fits 10-inch by 6-inch nominal ductwork and installs vertically or horizontally. It is intended for low-pressure HVAC systems that require a dynamic barrier rated for one and a half hours of fire exposure.

Capacity and headroom

The damper provides a free area of 0.219 square feet and uses a 165-degree fusible link to close automatically during a fire. Its 22-gauge galvanised steel construction meets UL 555, NFPA 80, 90A, 101, IBC, CSFM and NYC MEA standards, but the fire resistance rating is less than three hours.

Fusible link temperature

The 165-degree Fahrenheit fusible link determines when the damper activates, making it suitable only for environments where that trip point matches the design requirements. Systems needing a higher or lower activation temperature will require a different link.

Highlights

  • 1-1/2 hour fire rating protects duct penetrations
  • UL 555 and NFPA 80/90A/101 compliance for code acceptance
  • 165 °F fusible link triggers automatic closure
  • 22 ga galvanised steel resists corrosion in HVAC systems
  • .219 sq ft free area maintains airflow efficiency

Specifications

BrandDAYTON
TypeDynamic With Fire Resistance Rating Less Than 3 Ho

Questions about this item

Will this 5-3/4x9-3/4 inch fire damper fit my existing 10x6 inch ductwork?

Yes. The damper is designed for a nominal duct width of 10 inches and a nominal duct height of 6 inches, matching your duct dimensions exactly.

How can I verify the 165-degree fusible link is functioning after installation?

The fusible link is a passive thermal device rated to release at 165 degrees F. It cannot be tested without destruction; visual inspection confirming the link is intact and correctly seated is the standard post-installation check.

Does the box include the 2TGG6 retaining angles needed for mounting?

The specifications list the 2TGG6 retaining angle as a recommended accessory. It is not included with the damper and must be purchased separately for proper installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.