We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton AC motor, single phase, 246 W, totally enclosed fan cooled

Dayton

Dayton PPT03313G AC Motor 1 Ph 246 W

SKU CH-37T0-0S785

Single-phase AC motor rated at 246 watts for centrifugal pump applications

  • Runs on standard 115/230 V AC supply
  • Delivers 1/3 hp for centrifugal pump duty
  • Totally enclosed fan-cooled enclosure protects internals
  • Auto thermal protection prevents overheating damage
  • Single-phase 60 Hz design simplifies installation

Dayton PPT03313G AC Motor Overview

The Dayton PPT03313G is a single-phase AC motor rated at 246 W and 1/3 hp. It operates on 115/230V AC at 60 Hz with a current draw of 4.0 / 2.0 A. The totally enclosed fan-cooled enclosure suits industrial machinery applications.

Ideal for Centrifugal Pump Replacement

This motor fits Dayton models 4JMW6 and 5WXR9 as well as Grainger parts 4JMW6 and 5WXR9. It is designed for centrifugal pump duty with automatic thermal protection. Buyers needing three-phase power or a different horsepower rating should look elsewhere.

Simple Direct-Wire Installation

Wiring follows standard single-phase connections at the nameplate voltage. The auto thermal protection resets itself after a trip. Ensure the ambient temperature stays below 104 Degrees F and verify the compatible model numbers before mounting.

Highlights

  • Runs on standard 115/230 V AC supply
  • Delivers 1/3 hp for centrifugal pump duty
  • Totally enclosed fan-cooled enclosure protects internals
  • Auto thermal protection prevents overheating damage
  • Single-phase 60 Hz design simplifies installation

Specifications

BrandDAYTON

Questions about this item

What electrical supply do I need to run the 115/230 V AC motor?

The motor runs on single-phase 115 V or 230 V AC at 60 Hz. At 115 V it draws 4.0 A; at 230 V it draws 2.0 A.

Can I keep my existing centrifugal pump and just swap in this 1/3 hp motor?

Yes. The motor is listed as compatible with centrifugal pumps and matches the Grainger part numbers 4JMW6 and 5WXR9 used on those pumps.

How can I confirm the motor is operating correctly after installation?

Check that the totally enclosed fan-cooled housing stays below the 104 °F maximum ambient rating and that the auto thermal protection does not trip during normal operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.