We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 12 mm red raised indicator light with brass nut

Dayton

Dayton industrial power supply

SKU CH-P5AP-5TDJV

12 mm raised LED indicator light with 240 V operation and 15,000-hour life

  • Engine BrandDAYTON
  • Engine Size12mm Mounting dia
  • 12 mm mounting fits standard panels
  • Red LED gives clear status at a glance
  • 240 V AC/DC input suits industrial mains
  • 15,000-hour rated life reduces replacement frequency
  • UL listed for verified safety compliance

12 mm 240 V Indicator Light

This 12 mm diameter panel indicator operates at 240 V AC or DC and draws 4.17 mA. A red LED behind a polycarbonate lens provides a raised profile for clear visibility. The nylon body and brass mounting nut fit panels from 0.028 in to 0.110 in thick. It is UL Listed and rated IP40 for basic dust protection.

15 000 Hour Rated Life

The LED is rated for an average life of 15 000 hours under continuous operation at the specified voltage. Current draw remains steady at 4.17 mA, so thermal load on the panel is minimal over extended duty cycles. IP40 rating means the lens resists ingress of solid objects larger than 1 mm but is not waterproof. Sustained vibration or voltage transients beyond 240 V are not covered by the listed specifications.

Panel Cutout and Wiring Check

Verify that your panel cutout matches the 12 mm mounting diameter and that material thickness falls between 0.028 in and 0.110 in. The electrical connection uses M 2.5 screw terminals; ensure your wiring lugs suit this thread size. Confirm the supply voltage is 240 V AC or DC, as other voltages are not supported. This indicator is restricted from sale in California under Proposition 65.

Highlights

  • 12 mm mounting fits standard panels
  • Red LED gives clear status at a glance
  • 240 V AC/DC input suits industrial mains
  • 15,000-hour rated life reduces replacement frequency
  • UL listed for verified safety compliance

Specifications

Engine BrandDAYTON
Engine Size12mm Mounting dia

Questions about this item

How much heat or power does the 240 V raised indicator draw when lit continuously?

The LED draws 4.17 mA at 240 V AC/DC, so heat and power consumption are minimal during all-day operation.

What panel cut-out and thickness does the 12 mm raised indicator need to mount properly?

It requires a 12 mm mounting diameter and fits panel thicknesses from 0.028 in to 0.110 in with the supplied brass nut.

Can the IP40-rated 12 mm indicator sit next to older 240 V panel lights without electrical interference?

Yes — the screw-terminal connection and low 4.17 mA draw make it electrically compatible with legacy 240 V indicator circuits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.