Dayton IEC Timer Off Delay 10-180 Sec 1NO/1NC Transparent

IEC Timer Module Off Delay 10 to 180 Seconds

The Dayton IEC timer module provides an adjustable off-delay function ranging from 10 seconds to 180 seconds. It features one normally open and one normally closed contact for switching two circuits. The transparent housing allows visual inspection of internal components. This unit suits industrial control panels that require a timed power-off sequence.

Capacity and Headroom Two Contacts 10 to 180

The timer handles a minimum delay of 10 seconds and a maximum of 180 seconds, covering typical motor coast-down or lighting hold-over needs. With only two contacts, it cannot manage complex multi-stage shutdowns without additional relays. The single adjustment knob sets the entire range, so very short delays under 10 seconds are not possible.

Interface Limits Front Mount Starter Compatibility

The module mounts on the front of a starter, limiting installation to panels with that specific mounting pattern. It complies with California Proposition 65 requirements, noting the presence of listed chemicals. No other certifications or voltage ratings are provided in the data, so the installer must verify suitability for the control voltage in use.