Dayton
Dayton GGS 57024 Load Chain Hoist 20 ft 1500 lb 20.63 ft
A load chain hoist rated for 1,500 lb lift capacity with 20 ft compatible lift height and 20.63 ft overall length
- 1,500 lb lift capacity handles heavy shop loads
- 20 ft lift height reaches elevated work areas
- 63 ft chain length provides full rated travel
- Lever chain operation gives precise manual control
- Dayton GGS 57024 model built for industrial use
Product identity
The Dayton GGS 57024 is a lever chain hoist built for lifting and pulling tasks in automotive and industrial workshops. It handles a rated load capacity of 1,500 lb and provides a compatible lift height of 20 ft with an overall length of 20.63 ft.
Sustained operation
The hoist is designed for manual lever operation rather than powered duty cycles. Under continuous heavy use the operator controls the pace, so heat build-up and motor fatigue are not factors. The chain and brake mechanism maintain their rated capacity across repeated lifts without performance drop-off.
Interface limits
The lever chain interface relies on the operator's physical effort and the hoist's mechanical advantage. Practical limits are set by the 1,500 lb capacity and the 20 ft lift height. The hoist cannot exceed these ratings and requires a suitable anchor point that can support the full load.
Highlights
- 1,500 lb lift capacity handles heavy shop loads
- 20 ft lift height reaches elevated work areas
- 63 ft chain length provides full rated travel
- Lever chain operation gives precise manual control
- Dayton GGS 57024 model built for industrial use
Specifications
| Brand | DAYTON |
|---|
Questions about this item
How much effort is needed to operate the 1,500 lb hoist continuously through a full shift?
The lever chain mechanism uses mechanical advantage so the operator applies only a fraction of the 1,500 lb rating, and the 20.63 ft chain length lets you complete long lifts without re-rigging.
What mounting point must already exist on the beam or trolley for this Dayton GGS 57024 to attach?
The hoist hooks directly onto any rated anchor, beam clamp or trolley that accepts a standard top hook, so the supporting structure and its hardware must be in place first.
Can the 20 ft lift height work with an older low-headroom trolley I already own?
Yes, the 20 ft compatible lift height is independent of the trolley; as long as the trolley’s hook opening fits the hoist’s top hook and its capacity meets or exceeds 1,500 lb, the combination will function.
More in Lifting, Pulling & Conveying
Similar items
Same shelf, same checkout — eight coins and a 30-minute rate lock.
