Dayton
Dayton 1/4 in 50 ft 7x7 Galvanized Steel Cable 1220 lb WLL
50 ft of 1/4 in galvanised steel cable rated for 1220 lb working load with 7x7 construction and polypropylene coating
- Supports heavy lifting with a 1,220 lb working load limit
- Galvanized steel construction resists corrosion for long outdoor life
- 7x7 strand design gives flexibility without sacrificing strength
- 50 ft length provides reach for winching and rigging jobs
- Polypropylene coating protects the rope and reduces handling friction
1/4 in 7x7 Galvanized Steel Cable
The cable is 50 ft long with a 1/4 in diameter and a 7x7 strand construction. It uses galvanized steel with a polypropylene coating for corrosion resistance. The working load limit is 1,220 lb and the breaking strength is 6,100 lbf. It is supplied plain-ended and unlubricated.
Suitable for general lifting and pulling tasks
This cable suits applications that require a 1,220 lb working load limit and a 50 ft length. It is not for users who need a higher working load limit or a longer continuous length. Buyers requiring a different end termination or a specific bend radius should look elsewhere. The black polypropylene coating may not suit environments needing a bare metal finish.
Plain ends require user-supplied terminations
The plain-cut ends mean you must add thimbles, clips or sleeves to complete a rigging assembly. The 7x7 construction provides flexibility for sheaves or winch drums without a specified minimum bend radius. The IWRC core supports the strands under load while the coating protects the steel. No lubrication is applied, so storage in a dry area is advisable.
Highlights
- Supports heavy lifting with a 1,220 lb working load limit
- Galvanized steel construction resists corrosion for long outdoor life
- 7x7 strand design gives flexibility without sacrificing strength
- 50 ft length provides reach for winching and rigging jobs
- Polypropylene coating protects the rope and reduces handling friction
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What fittings or terminations are required to attach the plain ends of this 1/4 in galvanized cable to my lifting hardware?
The cable has plain ends, so you will need compatible wire-rope clips, thimbles or swaged sleeves rated for 1/4 in diameter and the 1,220 lb working load limit to create secure attachment points.
Can this 7x7 galvanized steel cable run over existing sheaves or pulleys sized for 5/16 in rope without excessive wear?
The overall diameter with the polypropylene coating is 5/16 in, so it will fit sheaves grooved for that size; the 7x7 construction provides moderate flexibility for bending around standard pulley diameters.
How can I verify the cable is performing correctly after installation and first load?
Inspect the plain-end terminations for slippage, check the black polypropylene coating for cuts or abrasion, and confirm the cable runs smoothly over sheaves without kinking or bird-caging under load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
