Dayton
Dayton Endless Round Sling 8 ft 13 200 lb
Endless polyester round sling rated for 13,200 lb vertical, 10,600 lb choker and 26,400 lb basket hitches
- Endless design enables quick basket, choker or vertical hitches
- Polyester core and sleeve resist abrasion and UV exposure
- Vertical capacity 13,200 lb handles heavy lifts
- Choker capacity 10,600 lb secures loads at an angle
- Wide 200 °F temperature range suits hot environments
8 ft endless round sling
The Dayton endless round sling measures 8 ft and is built for lifting, pulling and conveying tasks. Its polyester core and sleeve handle vertical, choker and basket hitches. Rated for 13,200 lb vertical capacity, it suits riggers and maintenance crews moving heavy loads.
13,200 lb vertical hitch capacity
The single figure that decides fit is the 13,200 lb vertical hitch capacity. Choker hitch capacity is 10,600 lb and basket hitch capacity is 26,400 lb. Select this sling only when the working load stays within those limits for the chosen hitch type.
Endless design with no eyes
The endless loop slips over the load and tightens without hardware, so installation is fast. Polyester construction resists temperatures from -50 to 200 degrees F. No visual indicators are fitted, so inspect the red sleeve for cuts or abrasion before each use.
Highlights
- Endless design enables quick basket, choker or vertical hitches
- Polyester core and sleeve resist abrasion and UV exposure
- Vertical capacity 13,200 lb handles heavy lifts
- Choker capacity 10,600 lb secures loads at an angle
- Wide 200 °F temperature range suits hot environments
Specifications
| Brand | Dayton |
|---|
Questions about this item
What does the 13,200 lb vertical rating mean once the sling is on the job?
It is the maximum load you can lift with a single vertical hitch using this 8 ft endless polyester sling.
Which hitch standard governs the 26,400 lb basket capacity and what does it limit?
The basket hitch rating follows the same industry method and caps a two-leg basket lift at 26,400 lb.
What does the 2 in body diameter and 3 1/4 in width under load require for rigging hardware?
Shackles, hooks or master links must accept at least a 2 in body and 3 1/4 in flattened width.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
