Dayton
Dayton Brake 69 MHGXEC69GGS
Brake number 69 designed for electric chain hoists in lifting applications
- Brake designed for electric chain hoists
- Dayton brand ensures industrial-grade reliability
- New condition guarantees full factory performance
- Model 69 matches specific hoist compatibility
- Ships free directly from Zoro supplier
Dayton Brake 69
The Dayton Brake 69 is a replacement brake component designed for electric chain hoists. It provides the stopping function required for lifting and pulling operations in industrial settings. This new unit is supplied directly by Dayton for maintenance or repair work.
Compatibility and upgrade
This brake fits electric chain hoists that specify the 69 designation. It replaces a worn or failed original brake to restore safe load-holding performance. The upgrade is worth it when the existing brake no longer holds the rated load or shows excessive wear during inspection.
Build integration
The brake mounts into the hoist's existing brake housing and connects to the motor shaft or gear train as defined by the hoist manufacturer. No additional control electronics or hydraulic lines are required. Installation frees up the hoist for immediate return to service once mechanical alignment is verified.
Highlights
- Brake designed for electric chain hoists
- Dayton brand ensures industrial-grade reliability
- New condition guarantees full factory performance
- Model 69 matches specific hoist compatibility
- Ships free directly from Zoro supplier
Specifications
| Brand | DAYTON |
|---|
Questions about this item
Which electric chain hoist models does the Dayton Brake 69 MHGXEC69GGS fit?
This brake is designed for compatibility with electric chain hoists; verify your hoist's manual for the correct mounting pattern and torque specifications before installation.
What is the correct procedure for installing the brake on an electric chain hoist?
Mount the brake to the hoist motor flange using the specified hardware, ensure the air gap is set to the manufacturer's tolerance, and torque all fasteners in a cross pattern to prevent misalignment.
Which components of the Dayton Brake 69 MHGXEC69GGS require periodic inspection or replacement?
The friction discs, springs, and coil should be inspected regularly for wear, glazing, or damage; replace the friction disc pack when thickness falls below the service limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
