We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Dayton

Dayton 7DJ29 24" Blower 115V AC 6100 CFM High-Visibility

SKU CH-FTHK-MR87C

A 24-inch stationary blower delivering 6100 CFM on high speed with a high-visibility housing for industrial air circulation

  • High airflow reaches 6100 CFM on high speed
  • Two-speed motor delivers 3800 CFM on low setting
  • Direct-drive 1/3 HP motor runs at 1075 RPM
  • High-visibility yellow housing improves workplace safety
  • Operates up to 104 °F ambient temperature

Industrial Air Circulator

The Dayton 7DJ29 is a 24-inch high-visibility industrial blower designed for stationary air movement in workshops, warehouses and similar environments. It operates on 115V AC single-phase power with a permanent split capacitor motor rated at 1/3 horsepower. The unit delivers two-speed airflow at 6100 CFM on high and 3800 CFM on low, with corresponding motor speeds of 1075 and 600 RPM. A direct-drive design eliminates belt maintenance.

Upgrade From Smaller Floor Fans

This blower replaces smaller pedestal or floor fans when higher air velocity and volume are required across longer distances. The jump is worth it when air must reach 20 feet with velocities of 520 or 365 feet per minute depending on speed setting. The 33-inch diameter steel housing and high-visibility finish suit fixed mounting on a pedestal where oscillation is not needed. Sound output measures 74 dBA at maximum ambient temperatures of 104 degrees Fahrenheit.

Suits Fixed High-Volume Cooling

This model suits facilities needing permanent, non-oscillating airflow at two defined speeds from a single-phase 115V supply. It is not for buyers who need variable speed control beyond the two fixed settings, automatic oscillation coverage, or operation on voltages other than 115V AC at 60 Hz. Installations requiring lower noise levels than 74 dBA or ambient conditions exceeding 104 degrees Fahrenheit should look at alternative configurations.

Highlights

  • High airflow reaches 6100 CFM on high speed
  • Two-speed motor delivers 3800 CFM on low setting
  • Direct-drive 1/3 HP motor runs at 1075 RPM
  • High-visibility yellow housing improves workplace safety
  • Operates up to 104 °F ambient temperature

Specifications

BrandDAYTON

Questions about this item

Will the 33-inch diameter pedestal base fit in my workspace?

The fan has a 33-inch outside diameter and a 33-inch height, so measure at least that much clear floor space for the pedestal mount.

How do I wire the 115V AC motor and which speed tap do I connect first?

Connect the black lead to line voltage, white to neutral, and green to ground; the motor is a permanent split capacitor type with two speed taps — 1075 RPM for high and 600 RPM for low — select the tap matching the desired CFM before powering on.

When should I lubricate or replace the direct-drive motor bearings?

The permanent split capacitor motor runs at 1075 RPM on high and 600 RPM on low with direct drive; inspect bearings annually and replace if noise exceeds the rated 74 dBA or if rotation becomes rough.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.