Dayton
Dayton 7DJ27 24" High-Visibility Industrial Blower 115VAC
24-inch non-oscillating industrial blower delivers 6,100 CFM high and 3,800 CFM low airflow at 115V AC with two-speed permanent split capacitor motor
- High airflow moves 6100 CFM on high speed
- Two-speed motor delivers 3800 CFM on low setting
- Air reaches 520 feet per minute at 20 feet distance
- Direct-drive 1/3 HP motor runs at 1075 RPM high / 600 RPM low
- Ceiling wall or post mounting fits industrial workspaces
High-Visibility Industrial Blower
The Dayton 7DJ27 is a 24-inch stationary blower designed for industrial environments where high airflow and conspicuous placement are required. It mounts on ceilings, walls or posts and operates on 115V AC single-phase power.
Two-Speed Airflow Capacity
On high speed the unit moves 6100 CFM at 1075 RPM with a 3.28-amp draw, delivering 520 feet-per-minute velocity at 20 feet. Low speed provides 3800 CFM at 750 RPM using 2.29 amps, reducing velocity to 365 feet-per-minute for lighter ventilation needs.
Upgrade From Smaller Circulators
This blower replaces smaller floor or desk fans when a fixed, high-volume air source is needed across a wide area. The jump is justified when permanent mounting and 6100 CFM output match the workspace, but it is not suited for portable spot cooling or oscillating coverage.
Highlights
- High airflow moves 6100 CFM on high speed
- Two-speed motor delivers 3800 CFM on low setting
- Air reaches 520 feet per minute at 20 feet distance
- Direct-drive 1/3 HP motor runs at 1075 RPM high / 600 RPM low
- Ceiling wall or post mounting fits industrial workspaces
Specifications
| Brand | DAYTON |
|---|
Questions about this item
Will the 24-inch blade diameter fit the same ceiling mounting points as my older 20-inch industrial fan?
The outside diameter is 33 inches, so existing mounting hardware must accommodate that larger footprint and the 115V AC supply.
How can I confirm the blower is delivering the rated 6100 CFM on high speed after installation?
Measure airflow at the outlet; high speed should produce 6100 CFM with the motor running at 1075 RPM and drawing 3.28 amps.
Does the box include mounting brackets for ceiling, wall and post installation or must I purchase them separately?
The fan is designed for ceiling, wall or post mounting; brackets and any required hardware are sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
