We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small cylindrical HVAC motor with steel frame and stud mounting

Dayton

Dayton 71633697M HVAC Motor 1/30 HP 1550 rpm 115V 3.3 Frame

SKU CH-BAEY-XP2VD

A shaded-pole HVAC motor delivers 1/30 hp at 1550 rpm on 115 V AC, drawing 1.2 A with automatic thermal protection and continuous duty rating

  • typeClosed Base
  • Runs continuously with 1.0 service factor and automatic thermal protection
  • Two-speed operation at 1550 RPM nameplate for flexible airflow control
  • 25-watt output delivers efficient performance on standard 115V AC circuits
  • 3 frame steel construction with stud mounting fits common HVAC installations
  • Shaded-pole design with Class B insulation operates reliably up to 40 °C ambient

What it is

The Dayton 71633697M is a single-phase shaded-pole HVAC motor rated at 1/30 hp and 1550 rpm for 115V AC systems. It suits maintenance technicians and DIYers replacing a direct-drive blower or fan motor in residential or light-commercial equipment.

Check before ordering

Verify that your supply voltage is 115V AC at 60 Hz because the motor is not usable at 200V or 208V. Confirm the driven load draws no more than 1.2 A full-load current and that the mounting studs match the 3.3 frame pattern on the existing housing.

Build and connections

The steel frame uses an open air-over enclosure with auto-reset thermal protection and Class B insulation rated for 40 °C ambient. A stud mounting style secures the closed-base motor directly to the fan housing, while the clockwise shaft rotation viewed from the shaft end determines the required fan blade orientation.

Highlights

  • Runs continuously with 1.0 service factor and automatic thermal protection
  • Two-speed operation at 1550 RPM nameplate for flexible airflow control
  • 25-watt output delivers efficient performance on standard 115V AC circuits
  • 3 frame steel construction with stud mounting fits common HVAC installations
  • Shaded-pole design with Class B insulation operates reliably up to 40 °C ambient

Specifications

BrandDAYTON
typeClosed Base

Questions about this item

What does the 71633697M HVAC motor include, and will I need to buy a mounting bracket or capacitor separately?

The motor ships as a single unit with a steel frame, stud mounting and auto thermal protection; no bracket, capacitor, fan blade or wiring harness is included.

The listing shows 1/30 hp and 1550 rpm — are there other horsepower or speed versions of this 3.3 frame motor I should consider?

This model is only offered as a 1/30 hp, two-speed shaded-pole motor at 1550 rpm; no alternate horsepower or rpm ratings exist for the 3.3 frame in this series.

In a real HVAC unit, what does the 25 W output and 1.2 A draw at 115 V actually mean for airflow and heat?

At 25 W output the motor delivers roughly 1/30 hp continuously at up to 40 °C ambient, drawing 1.2 A on 115 V AC; it is not usable on 200 V or 208 V supplies.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.